sc300 NA-T turbo header
#1
Lead Lap
Thread Starter
sc300 NA-T turbo header
A guy by the name of Dave Gysland is looking for interest to make a production run of 2jz-ge stainless, near-equal-length headers for the t4 flange (i.e. Greddy T78, T88, SP turbos, Turbonetics T series turbos, ITS turbos etc.).
He has a ge motor that he performing a conversion on. As a cost savings to those of us going NA-T, he needs at least 5 commited buyers with 50% down to make a production run of the manifold.
Anyone else interested? Check out the link. You can be the judge of his workmanship and asking price:
http://www.supraforums.com/showthrea...threadid=97976
-scott
He has a ge motor that he performing a conversion on. As a cost savings to those of us going NA-T, he needs at least 5 commited buyers with 50% down to make a production run of the manifold.
Anyone else interested? Check out the link. You can be the judge of his workmanship and asking price:
http://www.supraforums.com/showthrea...threadid=97976
-scott
Last edited by motorheaddown; 01-21-03 at 04:19 PM.
#4
Lead Lap
Thread Starter
Originally posted by Bean
i think the T78 and other associated greddy turbos will not bolt up to a T4 flange; as they are Mitsubishi turbos; not garret
the price is a tad harsh unless that includes the wastegate and downpipe too
i think the T78 and other associated greddy turbos will not bolt up to a T4 flange; as they are Mitsubishi turbos; not garret
the price is a tad harsh unless that includes the wastegate and downpipe too
Price is a matter of choice. This guy builds/races his own stuff, and he has a good reputation on SupraForums.
-scott
#7
however
If you go to his site he does have a pretty darn good price on a single turbo conversion for a 2JZGTE... His package is about the same price as most people/companies header... Go look and tell me what you all think... Might be worth a look I guess..
Thread
Thread Starter
Forum
Replies
Last Post
slwazdsm
SC400 / 300 Classifieds
7
06-22-04 07:31 PM