Clutch kit hardware
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Washington
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Clutch kit hardware
Hi so I have just bought a 2jzge to put in my Nissan and I bought a clutch kit from some guy so literally, the only items I have are the flywheel, pressure plate and clutch disc. I already bought arp flywheel bolts and an alignment tool.
What I need to know is what size bolt do I need to fasten the pressure plate to the flywheel, and do I need any sort of dowell pins to fit between the pressure plate and flywheel to make a small gap? (These came in an old clutch kit for my nissan I'm assuming a w58 clutch requires it too)
Any help is much appreciated!
What I need to know is what size bolt do I need to fasten the pressure plate to the flywheel, and do I need any sort of dowell pins to fit between the pressure plate and flywheel to make a small gap? (These came in an old clutch kit for my nissan I'm assuming a w58 clutch requires it too)
Any help is much appreciated!
Thread
Thread Starter
Forum
Replies
Last Post
Blk97SC300
SC400 / 300 Classifieds
3
07-31-08 12:42 AM