kyle178849

I feel like an idiot.. So made a turn too fast and ran my sc300 up the curb slowed down a bit before hitting the curb the alignment is really off but i was able to drive home. When I got home i checked under the car and it was leaking oil. Can this be that I effed up my Oil pan gasket? Or worse... How easy it is to fix? its a 93 sc300
thanks

Bflatsharp

iTrader: (18)

Frist go back and fix the curb.
Now buy some jack stands. Get the car up and tell us what is leaking.
rules
#1. Do not turn too fast
#2. Never forget rule #1
I hate to say it but nice firsf post.

TweakTech

iTrader: (2)

Well what did ya go and do that for! Just kidding. I doubt it's your GASKET, but more likely the actual oil pan itself. you might have cracked it, and with the engine running, the built up oil pressure is causing the leak. Jack the car up, get under there with some brake clean and clean off all the excess oil. Then start the car and crawl back underneath and see where the oil is coming from. Just please make sure your car is stable on the jack stands. chock the wheels if need be.

levie

iTrader: (1)

not a good first post hahaha, sorry about your luck man, but we need to see some pictures.

Justin2JZ

Unfortunate first post, +1 on pics. Welcome to CL btw.

greens14

iTrader: (28)

we need pics.. because i have parts! im just sayin. lol

kyle178849

Thanks everyone I will have pictures up soon, I need to get my jacks back from a friend thats currently fixing his mr2, and no i did not mess up the curb... it was just my car...never doing that again haha! learned my lesson for sure!

SEXC

iTrader: (2)

Did your friend run over a curb too Thank god nobody got hurt. Enjoy your car but be safe