Sc with 1fz-fe with 76mm turbo
#1
gte & na-t
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Sc with 1fz-fe with 76mm turbo
I am in the process of building a Stroker Motor for my SC, this is not an over night project it will be done next winter.
After a conversion with some local friends last saturday, I decided to go a different route.
4.5L out of the Land Cruiser Billet 76mm Turbo.
I did some research on the engine 1FZ-FE Engine 4.5L I6 DOHC 9.0.1 CR, it will be on stock compression.
I know i will need to Cut the hood since the engine is taller than the 2JZ.
I will have my Buddy make both intake and Exhaust manifold.
I have search but couldn't find any Supra or Sc with this swap.
Please the negative comments out of this thread thanks.
After a conversion with some local friends last saturday, I decided to go a different route.
4.5L out of the Land Cruiser Billet 76mm Turbo.
I did some research on the engine 1FZ-FE Engine 4.5L I6 DOHC 9.0.1 CR, it will be on stock compression.
I know i will need to Cut the hood since the engine is taller than the 2JZ.
I will have my Buddy make both intake and Exhaust manifold.
I have search but couldn't find any Supra or Sc with this swap.
Please the negative comments out of this thread thanks.
#4
gte & na-t
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Thanks guys i saw that thread before but never actually paid attention lol .
I will pm the guys and find out more about what i need to drop it in, i should be able to make my own harness using the 2JZ Harness.
I will pm the guys and find out more about what i need to drop it in, i should be able to make my own harness using the 2JZ Harness.
#6
gte & na-t
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
I can't see that link at work .
Haha you right, i like the I6 with more displacement should be able to blow the tires off the Car at 130mph and brake boost.
I am still searching, hopefully i can make it happen.
Trending Topics
#8
gte & na-t
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
#11
gte & na-t
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Lol I wanna do it make if it won't cost me an arm and leg to get the manifolds made.
Ali we need to hook up this week end about this project, check those two link that i had posted let me know what you think.
Ali we need to hook up this week end about this project, check those two link that i had posted let me know what you think.
#12
gte & na-t
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
http://www.titanmotorsports.com/to1fzenpr1hp.html
Thread
Thread Starter
Forum
Replies
Last Post
justincarn
SC430 - 2nd Gen (2001-2010)
13
02-17-17 02:32 PM
lolololol
Performance & Maintenance
15
03-19-08 10:56 PM
1fz, 1fzfe, built, choices, cruiser, forums, ifzfe, land, manifold, motorsports, stock, titan, transmission, turbo, www76mmturbo