Wiring Up the Alt.
#1
Wiring Up the Alt.
Looking for reference on how to wire up your alternator.
I have a 92 shell, and a 95 wiring harness. That means no wiring for the alternator at all.
I do have the (95)plug and wiring(It was cut... So I extended to the floor board where the ECU and conenctors meet) for the alt. but I have no idea on where to connect it to.
Which wires do I connect to? Rule of thumb is to match up coloring but I know SOME of the wire colors change through the years.
If some one could point me into the right direction it would helpful...
Schematics? Which plug are the wires located on? Color coordination?
HELP!!
Also my Alt wires are
- Red/Blue
- Pale White
- Yellow
I have a 92 shell, and a 95 wiring harness. That means no wiring for the alternator at all.
I do have the (95)plug and wiring(It was cut... So I extended to the floor board where the ECU and conenctors meet) for the alt. but I have no idea on where to connect it to.
Which wires do I connect to? Rule of thumb is to match up coloring but I know SOME of the wire colors change through the years.
If some one could point me into the right direction it would helpful...
Schematics? Which plug are the wires located on? Color coordination?
HELP!!
Also my Alt wires are
- Red/Blue
- Pale White
- Yellow
Last edited by SC2JZ300; 10-17-09 at 10:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post
gsean400
GS - 2nd Gen (1998-2005)
8
05-25-14 05:51 PM