A list of all bushings to be replaced Please!
#1
Rookie
Thread Starter
Join Date: Oct 2008
Location: Vernon, British Columbia
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
A list of all bushings to be replaced Please!
Through my research here I have found mention of many specific parts that can have bushings replaced (LCA, etc...), and mention of a "full bushing replacement" being done...
What I would love is a list of ALL of the suspension parts that have bushings that can be replaced. I would like to have a nice controlled ride!
This would be helpful to me because I have limited knowledge of car parts to begin with but would like to learn about ALL of the necessary parts, order the bushings, and replace them all myself.
Thanks
What I would love is a list of ALL of the suspension parts that have bushings that can be replaced. I would like to have a nice controlled ride!
This would be helpful to me because I have limited knowledge of car parts to begin with but would like to learn about ALL of the necessary parts, order the bushings, and replace them all myself.
Thanks
#3
Driver School Candidate
Join Date: Oct 2008
Location: SA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
http://203.31.191.243/fulcrumCat/
look here, use supra not soarer, as they list more for it, and havent updated their listings yet
look here, use supra not soarer, as they list more for it, and havent updated their listings yet
#4
Lexus Champion
iTrader: (2)
go to prothane website. you can get everything from them.
btw daizen products are just rebadged, up-marked prothane stuff
so the list:
1. prothane front kit- all upper and lower bushings- P/N- 18-207-BL
2. prothane rear kit- all upper and lower bushings, toe control, and traction rods, also bushings that press into the hub assembly- P/N- 18-304-BL
3. fulcrum rack bushings. dont get daizen. takes too long to receive.
4. energy sway bar bushings
search this site for energy bushing thread. it lists the P/N's
you can also remove the rear subframe, remove rear mounts, and get steel plates welded in. making for solid diff mounts.
i think i will make some solid subframe bushings too. no one makes them. all 4 i mean. front and rear.
btw daizen products are just rebadged, up-marked prothane stuff
so the list:
1. prothane front kit- all upper and lower bushings- P/N- 18-207-BL
2. prothane rear kit- all upper and lower bushings, toe control, and traction rods, also bushings that press into the hub assembly- P/N- 18-304-BL
3. fulcrum rack bushings. dont get daizen. takes too long to receive.
4. energy sway bar bushings
search this site for energy bushing thread. it lists the P/N's
you can also remove the rear subframe, remove rear mounts, and get steel plates welded in. making for solid diff mounts.
i think i will make some solid subframe bushings too. no one makes them. all 4 i mean. front and rear.
#5
Lexus Champion
iTrader: (12)
go to prothane website. you can get everything from them.
btw daizen products are just rebadged, up-marked prothane stuff
so the list:
1. prothane front kit- all upper and lower bushings- P/N- 18-207-BL
2. prothane rear kit- all upper and lower bushings, toe control, and traction rods, also bushings that press into the hub assembly- P/N- 18-304-BL
3. fulcrum rack bushings. dont get daizen. takes too long to receive.
4. energy sway bar bushings
search this site for energy bushing thread. it lists the P/N's
you can also remove the rear subframe, remove rear mounts, and get steel plates welded in. making for solid diff mounts.
i think i will make some solid subframe bushings too. no one makes them. all 4 i mean. front and rear.
btw daizen products are just rebadged, up-marked prothane stuff
so the list:
1. prothane front kit- all upper and lower bushings- P/N- 18-207-BL
2. prothane rear kit- all upper and lower bushings, toe control, and traction rods, also bushings that press into the hub assembly- P/N- 18-304-BL
3. fulcrum rack bushings. dont get daizen. takes too long to receive.
4. energy sway bar bushings
search this site for energy bushing thread. it lists the P/N's
you can also remove the rear subframe, remove rear mounts, and get steel plates welded in. making for solid diff mounts.
i think i will make some solid subframe bushings too. no one makes them. all 4 i mean. front and rear.
please do it i want a set!!!
Thread
Thread Starter
Forum
Replies
Last Post
Zoolander
Suspension and Brakes
5
04-03-15 06:28 PM
Banshee365
LS - 1st and 2nd Gen (1990-2000)
7
02-24-10 05:51 PM