Gated Shifter woes
#1
Lead Lap
Thread Starter
iTrader: (3)
Join Date: Sep 2007
Location: Northern Indiana
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
Gated Shifter woes
I just picked up a 1999 SC400 gated shifter assembly without the wood trim. I paid $50.
The problem is, that its out of a 99 400. I have a 1992 SC300.
Now, on JesLet's thread its purely wiring. I need a definitive answer on that the 400 shifter will work with my 300. What conversion type stuff will I need to do?
The problem is, that its out of a 99 400. I have a 1992 SC300.
Now, on JesLet's thread its purely wiring. I need a definitive answer on that the 400 shifter will work with my 300. What conversion type stuff will I need to do?
#2
I just picked up a 1999 SC400 gated shifter assembly without the wood trim. I paid $50.
The problem is, that its out of a 99 400. I have a 1992 SC300.
Now, on JesLet's thread its purely wiring. I need a definitive answer on that the 400 shifter will work with my 300. What conversion type stuff will I need to do?
The problem is, that its out of a 99 400. I have a 1992 SC300.
Now, on JesLet's thread its purely wiring. I need a definitive answer on that the 400 shifter will work with my 300. What conversion type stuff will I need to do?
If you can't figure that out.....Then you shouldn't be doing this mod. Not trying to be a tool, but that should be obvious.
#4
Lexus Fanatic
iTrader: (5)
Mechanically, it will work but you will have a missing gear which will be "L"..So on the gated shifter, 2 gear on the shifter would be L and L would be a missing gear, it doesn't shift into L...3 on the plate would be 2 gear o/d off 4 gear would be 3rd gear o/d off, and d would be overdrive on...
The hardest part is to get it to fit mechanically...Mine took about 4 hours to get it to shift correctly...But it didn't do it without help...Its a very diffcult mod, I would not recommend to anyone who has never done this before..
The hardest part is to get it to fit mechanically...Mine took about 4 hours to get it to shift correctly...But it didn't do it without help...Its a very diffcult mod, I would not recommend to anyone who has never done this before..
#5
Driver School Candidate
Join Date: Sep 2008
Location: south bend
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post