Map ECU tunning
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: SD
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Map ECU tunning
I am tuning with MAP ecu on my SC300 and the car pulls great to about 5 grand then it just dies out almost like fuel cut and there is nothing I can do to tune it out. It stops so fast almost hit my head on the steering wheel, It leans out a little but not very much, then I get back on the gas and it wont let me accerate for about 5 seconds the car goes back to normal.
I am running a kit peiced together, I have a 50 trim with stock injectors, a map ecu and a walbro.
I am going to 8 pound so I dont understand why the car is doing this.
I am running a kit peiced together, I have a 50 trim with stock injectors, a map ecu and a walbro.
I am going to 8 pound so I dont understand why the car is doing this.
Last edited by VW_Vanagon; 12-17-07 at 11:45 AM.
#4
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: SD
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I found out it was a boost leak now the only problem I am having is that when I give it any gas it dies and then revss back up. and some times when i am drive it will lean out die and then jerk back to life.
Thread
Thread Starter
Forum
Replies
Last Post