what you guys think
11-25-05, 09:25 PM
#1
Is this a good deal?
i know most of you hate these threads but i respect you people's opinoun. i am not selling this it is for sale on SF. just asking some opinouns
"2JZ-GTE. This was a JDM motor originally. I got it and it was extremely clean. I purchased 550cc US injectors, a US harness, US 6spd ECU, MAF and factory sidemount/hoses. The goal was for a complete painless swap into my NA chassis. I then picked up US cams and tensioner. I had planned on going single with new fuel system, so I bought an HKS rail and top feeds. The new injector pigtails are installed in the harness, but they will fit stock injectors (shave the tabs on the injectors).
Motor comes with everything above, plus coils and ignitor. Only thing missing is the resistor pack for the injectors.
Asking 4200 + shipping for all of it. It will run about 250$ or so for shipping on a pallet.
have the HKS rail for sale in another thread, but the top feeds are already sold. I also have a spare ebay "braced" single manifold if someone wants it as well.
I'll even throw in a billet underdrive pully for free @ 4200 asking price"
"2JZ-GTE. This was a JDM motor originally. I got it and it was extremely clean. I purchased 550cc US injectors, a US harness, US 6spd ECU, MAF and factory sidemount/hoses. The goal was for a complete painless swap into my NA chassis. I then picked up US cams and tensioner. I had planned on going single with new fuel system, so I bought an HKS rail and top feeds. The new injector pigtails are installed in the harness, but they will fit stock injectors (shave the tabs on the injectors).
Motor comes with everything above, plus coils and ignitor. Only thing missing is the resistor pack for the injectors.
Asking 4200 + shipping for all of it. It will run about 250$ or so for shipping on a pallet.
have the HKS rail for sale in another thread, but the top feeds are already sold. I also have a spare ebay "braced" single manifold if someone wants it as well.
I'll even throw in a billet underdrive pully for free @ 4200 asking price"
Last edited by BigManne; 11-26-05 at 11:36 PM.
thats why i posted in the motor section
Trending Topics
11-27-05, 06:32 PM
#9
Lead Lap
Join Date: Dec 2002
Location: Ga
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
I think this is aliitle to high, however something can be said for being able to buy it and basically install without having any major issues of trying to locate parts..... Now I think a few of you all will remember I sold a JDM motor with all the USDM stuff (injectors, res. pack, ignitor, US harness, 6 speed ECU etc..) AND a Greddy T78 kit installed on the motor for $4500.00.... To a guy in Texas doing a SC swap.... O yea I also included Phils Manual... Now that I think back that was a great deal... But never the less I think that alittle high, especially now that 1JZ swap are SO damn cheap.
Thread
Thread Starter
Forum
Replies
Last Post
empera
SC400 / 300 Classifieds
1
08-08-17 07:22 AM
soarer8o8
SC400 / 300 Classifieds
7
03-01-09 10:05 AM