My new SC300 Exhaust Video - 2.25" Piping
#1
Instructor
Thread Starter
My new SC300 Exhaust Video - 2.25" Piping
Here's my exhaust video. 2.25" piping all the way back from the cats and a new 2.25" Y Pipe. I used their mufflers because I'm impatient. I might buy some magnaflow 14829's in the future if anybody thinks that will make it sound nicer.
The only thing I don't like is around 1500-2500 rpm's its so low and loud it vibrates the whole car. You can't really hear it at high speeds either.
http://www.shatteredskyfilms.com/other/Exhaust.wmv
BTW, i didn't notice I was burning oil until I saw this video. I have 185-195 compression all the way around but hopefully with good oil changes this won't turn into a worse problem. My car is a 92 with 146k. (My accord drank about a quart a week, for me after about 2 months its down from full to low).
The only thing I don't like is around 1500-2500 rpm's its so low and loud it vibrates the whole car. You can't really hear it at high speeds either.
http://www.shatteredskyfilms.com/other/Exhaust.wmv
BTW, i didn't notice I was burning oil until I saw this video. I have 185-195 compression all the way around but hopefully with good oil changes this won't turn into a worse problem. My car is a 92 with 146k. (My accord drank about a quart a week, for me after about 2 months its down from full to low).
#3
Instructor
Thread Starter
They had a Y-Piece that was pre-fabricated 2.25", He was going to just use the stock 2" one, but that would kind of defeat the purpose of 2.25" piping. I'll see if I can get under the car and take some pictures of it.
Oh, and I'll try to get a moving video
Oh, and I'll try to get a moving video
Thread
Thread Starter
Forum
Replies
Last Post
Xzria
RC F (2015-present)
5
04-26-18 10:31 PM