Transmission suggestions
#1
Pole Position
Thread Starter
Join Date: Jan 2006
Location: Ca
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Transmission suggestions
I have a SC400 which I will be installing a new dragon torque converter so while I was swapping the TC I was planning on changing from Toyota ATF fluid to AMSOIL synthetic ATF, changing the tranny filter and oil pan gasket anything else I should take care off?
And since I知 also supercharging my SC I知 planning on adding a tranny cooler would it be a hassle to add later or should I just install it now also?
How much is it tranny filter oil pan gasket @ the dealer?
How much ATF will I need?
Any recommended tranny cooler besides B&M?
And since I知 also supercharging my SC I知 planning on adding a tranny cooler would it be a hassle to add later or should I just install it now also?
How much is it tranny filter oil pan gasket @ the dealer?
How much ATF will I need?
Any recommended tranny cooler besides B&M?
#2
Lexus Test Driver
Join Date: Jul 2005
Location: il
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
I have a SC400 which I will be installing a new dragon torque converter so while I was swapping the TC I was planning on changing from Toyota ATF fluid to AMSOIL synthetic ATF, changing the tranny filter and oil pan gasket anything else I should take care off?
And since I知 also supercharging my SC I知 planning on adding a tranny cooler would it be a hassle to add later or should I just install it now also?
How much is it tranny filter oil pan gasket @ the dealer?
How much ATF will I need?
Any recommended tranny cooler besides B&M?
And since I知 also supercharging my SC I知 planning on adding a tranny cooler would it be a hassle to add later or should I just install it now also?
How much is it tranny filter oil pan gasket @ the dealer?
How much ATF will I need?
Any recommended tranny cooler besides B&M?
#3
Pole Position
iTrader: (3)
a341e tranny dry fill takes 8.7 quarts.
the filter is wire mesh and is easily cleaned, no need to replace unless it is damaged.
the gasket is fpig material, no paper/rubber gasket involved. you can pick up the gasket goop at any local parts store, just make sure you clean off the mating surfaces well before applying the sealant.
the filter is wire mesh and is easily cleaned, no need to replace unless it is damaged.
the gasket is fpig material, no paper/rubber gasket involved. you can pick up the gasket goop at any local parts store, just make sure you clean off the mating surfaces well before applying the sealant.
Thread
Thread Starter
Forum
Replies
Last Post
rwheelz
GS - 2nd Gen (1998-2005)
5
07-04-07 05:44 PM