GA FS: 01-06 LS430 Nagisa RCA Replica
#1
FS: 01-06 LS430 Nagisa RCA Replica
Hello Everyone,
I have for sale a set of Nagisa Roll Center Adjuster Replicas for sale. I purchased a set of Nagisas from Elite Auto Style and had a local machine shop that my friend at Caterpillar uses to replicate them for a buddy of mine and I made an extra. The shop drew them in CAD using the original and machined on a CNC. They are nearly identical to the original the only difference is the paint job on the replicas could have been a little better. Whose going to look at your paint at lower ball joint anyways lol? They do not come with bolts however included will be the bolt sizes and pitch for you to source at a local hardware store.
$500 Shipped Without Bolts
If you would like me to source them it will take an additional 2 weeks before the bolts are shipped out and an additional $16 as the bolts are about $2 dollars a piece. Please contact me via text or e-mail with any questions. Pictures are listed below.
HeartxAndxSoles@gmail.com or 678 577 6375
The following people that I've done transactions with or know me personally, if you could please vouch for me: Kira X, HowieDoIt, Brownman Ultm8mind, and a few others on here. I'm 100% legit and have plenty of references on eBay and within other hobbies that I buy/sell/trade.
The RCA on the left is the original, the two on the right are the replicas for comparison.
I have for sale a set of Nagisa Roll Center Adjuster Replicas for sale. I purchased a set of Nagisas from Elite Auto Style and had a local machine shop that my friend at Caterpillar uses to replicate them for a buddy of mine and I made an extra. The shop drew them in CAD using the original and machined on a CNC. They are nearly identical to the original the only difference is the paint job on the replicas could have been a little better. Whose going to look at your paint at lower ball joint anyways lol? They do not come with bolts however included will be the bolt sizes and pitch for you to source at a local hardware store.
$500 Shipped Without Bolts
If you would like me to source them it will take an additional 2 weeks before the bolts are shipped out and an additional $16 as the bolts are about $2 dollars a piece. Please contact me via text or e-mail with any questions. Pictures are listed below.
HeartxAndxSoles@gmail.com or 678 577 6375
The following people that I've done transactions with or know me personally, if you could please vouch for me: Kira X, HowieDoIt, Brownman Ultm8mind, and a few others on here. I'm 100% legit and have plenty of references on eBay and within other hobbies that I buy/sell/trade.
The RCA on the left is the original, the two on the right are the replicas for comparison.
Last edited by nDrew; 08-07-14 at 06:24 AM.
#7
This one is only for the front. This is similar to the Youzealand SS Pro Kit (fronts) or the GenB RCAs. From what I've read they change the geometry of your suspension which causes your car to go lower. It's like a spacer on your ball joint and is suppose to help relieve stress on ball the ball joint from going low.
Trending Topics
#8
#9
I have yet to install them on my car as I'm waiting to do my rear arms. I only want to have to do 1 alignment lol. From what I've read and researched I am told it adds 2-3 degrees negative camber. You do have some adjustment capability with your factory front suspension however it is limited. If you are not looking for that much camber you could ask the person doing the alignment to see what they can adjust.
Last edited by nDrew; 08-20-14 at 02:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
lexusondubs
2Gen GS430 / 400/ 300 Classifieds (98-05)
15
10-11-10 06:58 PM