Wheel fitment consultance
#16
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
I would unscrew and remove the fender plastic protector things then have the fenders rolled at a minimum.
For a 20x8.5 i would run a narrower tire like a 225x35x20 and for a 20x10 something like 265x30x20. Then i would pick the more aggressive lower offset sizes for the wheels. If u lower it more it will naturally start to increase the negative camber.
I would lower it down as much as u can safely drive for your area but don't be afraid to take some gardening or heavy duty scissors to the inside fender liners for removing spots where it is rubbing.
For a 20x8.5 i would run a narrower tire like a 225x35x20 and for a 20x10 something like 265x30x20. Then i would pick the more aggressive lower offset sizes for the wheels. If u lower it more it will naturally start to increase the negative camber.
I would lower it down as much as u can safely drive for your area but don't be afraid to take some gardening or heavy duty scissors to the inside fender liners for removing spots where it is rubbing.
Thread
Thread Starter
Forum
Replies
Last Post