When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys. I just installed this unit on my 2004 LS, and now the AFS OFF light keeps flashing, but only when I plug in the controller. Does anyone have an idea of what may be causing this?
You are right with the car list selection. Page 25 of the ASC680 user manual shows the right one for your harness. You can change at any time by pressing the upper left button and switch ignition on. On Page 25 you will find where TEMS is available. It is not possible to change on a UCF31.
Hey guys. I just installed this unit on my 2004 LS, and now the AFS OFF light keeps flashing, but only when I plug in the controller. Does anyone have an idea of what may be causing this?Thank you.Anton
Did you choose the right vehicle on the display when setting up? UCF31 with the reverse "C"
Here's a picture of the LS430 on 22's with ASC680 in low position. You can activate saved heights while driving therefore the controller starts every time with its WARNINGS screen in low mode. In the highest pos the LS becomes a SUV w/o suspension. Good after flash flood.