Multi Layer Steel Gaskets (MLS)
#1
Lexus Champion
Thread Starter
Join Date: Jan 2003
Location: SGV
Posts: 1,621
Likes: 0
Received 0 Likes
on
0 Posts
Multi Layer Steel Gaskets (MLS)
Hello All,
I have a local peformance gasket company is willing to make a Multi Layer Steel gaskets for our 1UZFE. The minimum order is 50 sets. We will order two different thickness. OEM thickness (.051") and .093" for lower the compression application. This company makes those MLS racing gaskets for Supercharged Cobra applications. MLS are slight more than copper gaskets. They are $250 a pair. If you are interested please let me know. These gaskets are the best of the best. He would require a brand new set of OEM gasket to do the job and I have a brand new set at home.
I am willing to put some money into this project, but 50 set would be little too much. The process will take few weeks and I would need a deposit for those who are interested.
Thanks
David C. Phan
Lextreme.com site admin
I have a local peformance gasket company is willing to make a Multi Layer Steel gaskets for our 1UZFE. The minimum order is 50 sets. We will order two different thickness. OEM thickness (.051") and .093" for lower the compression application. This company makes those MLS racing gaskets for Supercharged Cobra applications. MLS are slight more than copper gaskets. They are $250 a pair. If you are interested please let me know. These gaskets are the best of the best. He would require a brand new set of OEM gasket to do the job and I have a brand new set at home.
I am willing to put some money into this project, but 50 set would be little too much. The process will take few weeks and I would need a deposit for those who are interested.
Thanks
David C. Phan
Lextreme.com site admin
Thread
Thread Starter
Forum
Replies
Last Post
Banshee365
LS - 1st and 2nd Gen (1990-2000)
11
10-14-16 11:44 PM