Ucf10/ 1993 ls400 rear camber?
#3
BahHumBug
iTrader: (10)
not necessarily, the x1 designation refers to the C-type cars in europe/japan which were fully loaded with air suspension and reclining rear seats. There are no USDM/North American UCF11/21.
OP has a UCF10.
There is a decent bit of factory camber adjustment as these cars are double wishbone and NOT macpherson strut. Unless you're going for a LOT of camber you won't need arms. The arms work regardless of which suspension setup you're on.
OP has a UCF10.
There is a decent bit of factory camber adjustment as these cars are double wishbone and NOT macpherson strut. Unless you're going for a LOT of camber you won't need arms. The arms work regardless of which suspension setup you're on.
#4
Driver School Candidate
#6
Thread
Thread Starter
Forum
Replies
Last Post