Kik down
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2013
Location: Russia
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Kik down
Guys, have problems with kik on my LS 400 98 ucf 20/21. some time ago i had problems with check vsc. i installed throttle from celsior(japan-the problem was solved . but now when i kik my pedal rpm reachs only to 5000 and and then it is breakdown sharply. I have no cheks. whats the matter???
#3
Moderator
Measure the resistances of 2 sensors below attached to the throttle body.
The throttle position sensor should show around 1.8 kΩ between terminals 1 and 4. Also check the resistance change of terminals 2 and 3 rotating the valve and confirm there's no abnormal resistance jump or glitch.
The similar thing can be said to the accelerator position sensor, but the resistance should be about 2.5 kΩ between terminals 3 and 4. Also check the resistance change of terminals 1 and 2.
Thread
Thread Starter
Forum
Replies
Last Post
99scMMGT
Performance & Maintenance
1
10-19-15 09:06 AM
2JZSoarer
Performance & Maintenance
3
08-08-04 03:31 PM