Rack bushings
#1
Pit Crew
Thread Starter
Rack bushings
I have replaced tie rod ends, rack ends, strut bushings, tires and aligned twice.
Still had a little tram lining issue. I run my tire pressure at MFG max so that has a lot to do with it.
But this week I replaced the steering rack bushings which helped the steering control even more.
The old ones looked ok, but I expect they were allowing some rack squirm and even a little clunk when hitting just the right bumps.
Ricochet Polyurethane Technologies of SoCa makes the bushings that I found on Ebay.
http://www.ricochetpt.com/
The replacement is pretty basic. Remove cover, use 17 mm socket to remove both clamps. Once the clamps are off, I was able to pull on the rack to move it out of the way a little allowing one to wrap the new split bushings around the rack . Align the arrows on the bushings just as the originals. Bolt the clamps and pan back on. Steer away.
Still had a little tram lining issue. I run my tire pressure at MFG max so that has a lot to do with it.
But this week I replaced the steering rack bushings which helped the steering control even more.
The old ones looked ok, but I expect they were allowing some rack squirm and even a little clunk when hitting just the right bumps.
Ricochet Polyurethane Technologies of SoCa makes the bushings that I found on Ebay.
http://www.ricochetpt.com/
The replacement is pretty basic. Remove cover, use 17 mm socket to remove both clamps. Once the clamps are off, I was able to pull on the rack to move it out of the way a little allowing one to wrap the new split bushings around the rack . Align the arrows on the bushings just as the originals. Bolt the clamps and pan back on. Steer away.
Last edited by dveneman; 07-15-14 at 10:44 AM. Reason: added photo
#3
#5
They didn't work out for me. I got lots of clunking and popping from the steering column with the poly bushings installed, so I put in a new pair of OEM rubber bushings instead. While down there I discovered that my car is missing the undercover that protects the steering rack. I guess I'll search CL listings for parts cars for one, as a new one is about $150.
Thread
Thread Starter
Forum
Replies
Last Post
akafixture
Suspension and Brakes
8
11-10-14 08:05 AM