'96 LS400 brake caliper downgrade question...
#1
'96 LS400 brake caliper downgrade question...
I need verification if the '96 Ls400's came stock with either 2 piston, or 4 piston front calipers?
can i remove my current 4 piston calipers, and swap over stock SC300 calipers/rotors without killing myself by using them on a heavier car such as the LS?
thanks
can i remove my current 4 piston calipers, and swap over stock SC300 calipers/rotors without killing myself by using them on a heavier car such as the LS?
thanks
#3
back when i had an '92 SC, i swapped some '97 LS calipers onto it.
So i assume that stock SC front calipers would naturally bolt onto my current '96 Ls with no prob (other than they might not provide sufficient stopping power for a heavier car?)
someone chime-in please
So i assume that stock SC front calipers would naturally bolt onto my current '96 Ls with no prob (other than they might not provide sufficient stopping power for a heavier car?)
someone chime-in please
#5
bro THAT's why i asked if '96 LS's also came with smaller front brakes from factory, which i could've swore they did. i thought the 4pot brakes were like trim level options. If i know that the smaller brakes definitely didn't also come from factory on the 95-00 LS's , then i would not run them.
Trending Topics
#9
BahHumBug
iTrader: (10)
bro THAT's why i asked if '96 LS's also came with smaller front brakes from factory, which i could've swore they did. i thought the 4pot brakes were like trim level options. If i know that the smaller brakes definitely didn't also come from factory on the 95-00 LS's , then i would not run them.
#10
nope. i make Wheels fit around the car.
And with that process/skillet, certain things may get sacrificed. However, in this case, i won't swap the needed bigger brakes for the obvious reason, so i'll go a different route to make the wheels fit how i want them to.
And with that process/skillet, certain things may get sacrificed. However, in this case, i won't swap the needed bigger brakes for the obvious reason, so i'll go a different route to make the wheels fit how i want them to.
#15
Thread
Thread Starter
Forum
Replies
Last Post
Armitage
LS - 1st and 2nd Gen (1990-2000)
3
05-23-17 01:36 PM