DIY ipod drawer retrofit for 1 DIN HU
#1
Pole Position
Thread Starter
Join Date: Nov 2007
Location: VN
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
DIY ipod drawer retrofit for 1 DIN HU
this is what I did when I replaced stock nak HU with 1 din jvc receiver (no CD player)
curios about what is in? here we go
realize a stock ashtray up there? yes it is, here is how i fit it in
materials are old HU frame with all electronic components removed and an ashtray. I cut the bottom of the ashtray so that it fits 1 DIN
I cut the 2 side metal frame like this
only the frame bottom used, removed top
now try it on
into the place
with drawer open
the bezel needs a bit more time from this
to this
thats it. hope it provides ideas for anyone who are going to replace stock with 1 din HU
curios about what is in? here we go
realize a stock ashtray up there? yes it is, here is how i fit it in
materials are old HU frame with all electronic components removed and an ashtray. I cut the bottom of the ashtray so that it fits 1 DIN
I cut the 2 side metal frame like this
only the frame bottom used, removed top
now try it on
into the place
with drawer open
the bezel needs a bit more time from this
to this
thats it. hope it provides ideas for anyone who are going to replace stock with 1 din HU
#4
Pole Position
Thread Starter
Join Date: Nov 2007
Location: VN
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
do you think it matches the HU gloss finish? i want it looks somehow "related" to the HU as it actually keeps the iPod, where HU gets music from
Trending Topics
#10
Pole Position
Thread Starter
Join Date: Nov 2007
Location: VN
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys all for the comments. it makes my day
Last edited by qha_vn; 01-22-14 at 11:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
IntegresS
IS - 2nd Gen (2006-2013)
47
06-16-10 08:07 AM