taking door panels off? (1st gen ls4)
#1
Rookie
Thread Starter
Join Date: Aug 2001
Location: Alabama
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
i was wondering what i should be careful for when taking off the front door panels. i need to get to the speakers and sound deaden the doors. thanks in advance guys
#2
Search Function Inc.
Actually there is nothing to it. There are 2 screws around the middle of the door (1 is under the wooden part), 1 is closer to a dashboard inside the ventelation hole, another one is on the other side of the door (it holds a little plastic piece in place), last set of the screws is at the very bottom of the door (4 of them).
I have just finished with soundproofing my doors and changing the speaker size to 6.5. I'll have all the pics in a couple of days if you want.
I have just finished with soundproofing my doors and changing the speaker size to 6.5. I'll have all the pics in a couple of days if you want.
Trending Topics
#8
Search Function Inc.
Actually it is pretty hard as long as you do not know ehat you are doing. There is a plastic enclosyre for a 4" speaker inside the door panel. The best way is to cut the top of that enclosure off, cut out the top out of MDF board and make a desired size hole there. Use a lil dynomat extreeme (I used a better alternative) and screws to fit the MDF on top of the plastic.
thats it
thats it
Thread
Thread Starter
Forum
Replies
Last Post
BTC89LS400
LS - 3rd Gen (2001-2006)
1
06-03-18 06:09 AM