Door speaker fabric coming off speakers
#1
Guest
Posts: n/a
Has anyone had the problem with the fabric on the door speakers loosening and beginning to come out of the grooves? Both rear speakers, and one front speaker. Would it be best for me to just tuck the fabric back into the grooves, or should I take the door panels apart to fix this? Thanks, for any help .
P.S. the car is a '91 LS 400
P.S. the car is a '91 LS 400
#2
Sorry to hear that.
This hasn't happen to me but I what I most likly do is just put some silicon glue and put it around the edges of the fabric. That way it gives it time to dry and if you get all over the place it drys clear and you can basicly peal off the access.
After putting the glue around the edges tuck them back in and let dry.
The glue should dry to touch within a hour and will keep the fabric from peeling out again.
Good luck,
This hasn't happen to me but I what I most likly do is just put some silicon glue and put it around the edges of the fabric. That way it gives it time to dry and if you get all over the place it drys clear and you can basicly peal off the access.
After putting the glue around the edges tuck them back in and let dry.
The glue should dry to touch within a hour and will keep the fabric from peeling out again.
Good luck,
Thread
Thread Starter
Forum
Replies
Last Post
The Ikon
Lexus Audio, Video, Security & Electronics
5
06-21-01 09:14 PM