LS remote start install DIY
#181
This is all very tempting and I'm ready to pull the trigger. I'm good with wiring etc (I installed and did a DIY on the Nav bypass kit). My only concern is with the DBALL programming.....your post seems to hint that it may be fairly involved (?). Is it? When I look at the diagrams from Xpress, it seems straightforward....but is it?
GREAT write-up by the way!
GREAT write-up by the way!
#182
Pole Position
iTrader: (1)
I have the 2013 model and Bestbuy installer said that the FLCAN is not available. Instead idata has the ADS-AL-CA module for it. They want $250 for it installed. I looked and it only cost $50 online for the unit. If somehow I can get it flashed, I'd do the install myself.
Shibumi1: wonder if you can get me a module and have it flashed? I'll pay for it of course. Or if you know anyone would flash it, it would be greatly appreciated.
Shibumi1: wonder if you can get me a module and have it flashed? I'll pay for it of course. Or if you know anyone would flash it, it would be greatly appreciated.
#184
Pole Position
Never mind ...I just bought on EBay for 59 bucks and pre-flashed for my vehicle. GREAT deal!!
http://www.ebay.com/itm/301085632013...84.m1497.l2648
Looking forward to installing it...I get it on Tuesday.
http://www.ebay.com/itm/301085632013...84.m1497.l2648
Looking forward to installing it...I get it on Tuesday.
I just ordered it from this seller. I'm thinking of getting a Smart Start DSM 250 or DSM 350.
Last edited by Kuhan; 02-24-16 at 01:05 PM.
#185
Driver School Candidate
Join Date: Feb 2016
Location: pest
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hi all, I am not sure I understand the compatibility listings here
What I want to find out is if this is applicable (as in will funtion) with a 2008 LS600hL.
On the compatibility list I see "RSR" from 2009 onwards, and only "standard application" for 2008.
This according to the legends.
So what is standard application.
Can anyone confirm this would work with 2008?
Thank you.
What I want to find out is if this is applicable (as in will funtion) with a 2008 LS600hL.
On the compatibility list I see "RSR" from 2009 onwards, and only "standard application" for 2008.
This according to the legends.
So what is standard application.
Can anyone confirm this would work with 2008?
Thank you.
#186
Pole Position
Hi all, I am not sure I understand the compatibility listings here
What I want to find out is if this is applicable (as in will funtion) with a 2008 LS600hL.
On the compatibility list I see "RSR" from 2009 onwards, and only "standard application" for 2008.
This according to the legends.
So what is standard application.
Can anyone confirm this would work with 2008?
Thank you.
What I want to find out is if this is applicable (as in will funtion) with a 2008 LS600hL.
On the compatibility list I see "RSR" from 2009 onwards, and only "standard application" for 2008.
This according to the legends.
So what is standard application.
Can anyone confirm this would work with 2008?
Thank you.
#187
Driver School Candidate
Join Date: Feb 2016
Location: pest
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thank you.
Since then I found another (more official looking) site for the system. Here is seems it does remote start. I don't see a mention of the Viper or Python that you mentioned. Where can I confirm about this and know what exact devices that I would need to get.
http://www.xpresskit.com/VehicleComp...9&ps=1&s=0&c=0
Best ragards
Alex
EDIT: Also what makes me more confused with regards to what you wrote is that is I do select a firmware (from the dropdown menu) at the original link I aksed about . To be precise the TL3 3.14 Firmware. Then it shows 2008 LS600h as RSR. So are you definite about what you wrote? That is does need and extra unite apart from the DBALL2 kit?
Last edited by pompecukor; 02-25-16 at 04:48 AM.
#188
Question. Who has installed the smart start system to a Dball2? Is it any more involved or does it simply plug and play into the dball2?
My searching has not really answered this yet?
My searching has not really answered this yet?
#190
Lexus Champion
I'd contact a Viper dealer in your area.... DO NOT PLUG IN THE SMART START if the dball2 has power!!!! it will fry the dball2... unplug power (blue plug) then make sure to ground the gray wire from the smart start module.. then u can plug it into the dball2... then power the dball2 back up.. making sure the car is in clear view of the sky.. then all a dealer would need is the air i.d. of the unit to run a test an activate the unit
#193
Pole Position
#194
Lexus Fanatic
If all else fails, a dealer will do it. Albeit, at double the price probably..
#195
Pole Position
iTrader: (1)
Here's what I've found. Many average car audio shops shy away from anything like BMW, MB or Lexus. They're afraid of messing up a computer, module, etc. On my wifes X5, I had to find a high end specialty shop in Vancouver to install her remote start. Nobody else would touch it. For her CT200, I had less of an issue, and did find a local shop to do hers.
If all else fails, a dealer will do it. Albeit, at double the price probably..
If all else fails, a dealer will do it. Albeit, at double the price probably..