Avest/SpecD LS460 LED Tail Lights
#376
Lexus Test Driver
Yes they are the same within model years 07-09.
#380
#383
Lexus Fanatic
#385
Have anyone have problem with your tail lights? I'm talking about just the brake lights itself, all the other section of the led tailights works except for the brake light. When I step on my brakes my lights most of the time won't come on and other times when I step on my brakes not all of my lights up and are real dim and flickering. But on my passenger side every light works as it suppose to. Have anyone try to replace the led and taken the lense cover off? I want to know cause I want to replace the individual led that doesn't work. I really don't want to purchase another set. I do have resistors on my tail light in case anyone is wondering. Any help would be appreciated.
Could it be just some of the wires is not connected well where it's soldered on? Or just the led is dying or burnt out.
Could it be just some of the wires is not connected well where it's soldered on? Or just the led is dying or burnt out.
Last edited by Tdvlexo; 10-18-15 at 09:15 AM.
#386
Lexus Fanatic
No problems here and mine were "plug n' play"....no resistors required (other than what the kit came with). Yours should have been the same. Did you buy Avest? Did yours perhaps leak water into them?
Last edited by roadfrog; 10-18-15 at 09:38 AM.
#388
Does anyone know if they ever made these for 2011 and 2012 models, want to get rid of my stock tails with the amber overlay. Did a few searches but was not able to come up with anything. Thanks in advance.
#389
Advanced
Just ordered an Avest set from japan . I was wondering after seeing the specD install video they did not use any gaskets . Is it mandatory or optional to use the included gaskets. The set that i ordered have sequential yellow turn signal .