Change Of Lowering Springs Advice...
#1
Pole Position
Thread Starter
Change Of Lowering Springs Advice...
Currently my car is dropped on Tanabe DF210 Springs which gives the car a 1.0" drop all around... i have 20x9"F and 20x10.5R rims and i wanted to drop my car a little lower.. I was thinking about buying the L-Sportline Lowering springs which would drop the car 1.2" all the way around... look at the pictures of my car and tell me what you think i should do....
Trending Topics
#8
Lead Lap
iTrader: (2)
Juction Produce or YouZealand SS kit and call it a day.
Best of all, you can still retain your current drop springs with the SS kit and you'll get and extra 1" drop at all 4 corners (total of 2" drop).
The SS kits will set you back about $500-600. Add that to the cost of your DF210 drop springs and the total would come out to less then a set of coilovers or air.
Best of all, you can still retain your current drop springs with the SS kit and you'll get and extra 1" drop at all 4 corners (total of 2" drop).
The SS kits will set you back about $500-600. Add that to the cost of your DF210 drop springs and the total would come out to less then a set of coilovers or air.
#10
Wait. I just noticed that you have parking sensors which I think means you have an UL. I was under the impression that you couldn't put springs on an UL because of the air.
#13
Pole Position
Thread Starter
#14
Pole Position
Thread Starter
i understand what your saying..... my main issue is that the back of the car sits a little lower then the front because of my system and i want the front to be lower so that it looks level.... everytime i step on the gas the back drops and the front kinda lifts up.....
#15
Pole Position
Thread Starter
my car doesn't have airbags... it has the parking sensors and the radar camera and the headlight washers just like the UL....