2nd gen LS 400 front upper control arm (bushing)
#1
Driver
Thread Starter
2nd gen LS 400 front upper control arm (bushing)
hi its beeen quite a while my car is running fine still at 272K miles, but am feeling this front clunk once in a while, which i traced to the front UCA, i heard about the arnotts theres a thread on this, anyways, anybody has any info about replacement bushing for our cars, its seems very ridiculous to buy the whole arm for 300bucks or so, in nothings wrong except the bushing,
daizen and some other manufactures has only for the 89-94 LS400/celsior UCA bushing avaliable, so we are left out hopefully some one has info
daizen and some other manufactures has only for the 89-94 LS400/celsior UCA bushing avaliable, so we are left out hopefully some one has info
#4
Nope. You can buy OEM arms for a small fortune or try the Arnotts. But they are generally considered trash here. I replaced mine every 4 months for a year before replacing them with oem.
Thread
Thread Starter
Forum
Replies
Last Post
pass427
LS - 3rd Gen (2001-2006)
1
07-07-10 10:29 AM