changing to leds, but footlight spec,, ?
#1
Rookie
Thread Starter
Join Date: Sep 2010
Location: s. kalifornia
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
changing to leds, but footlight spec,, ?
i changed door courtesy light to leds and look kool, but can't figure out what led bulbs to get for footlights? on manual it says 194 (same as door courtesy) but lesser 1.4 watt. i pulled one out and it's tiny bout half size as door courtesy.
has anyone changed and bought the leds for these, if so where?
has anyone changed and bought the leds for these, if so where?
#6
I changed mine to LED awhile back. Just be very careful pulling out the sock bulbs. Tiny and can can break in socket. I did have issue with getting the LED to stay in at first wanted to fall out. Kept at it have to twist it in some to make it stay.
No issues so far. Swapped most of the them out except for key,shifter and glove box light.
No issues so far. Swapped most of the them out except for key,shifter and glove box light.
Trending Topics
#8
#10
Driver School Candidate
Join Date: Oct 2010
Location: N/A
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
i have leds throughout my celsior, its t5 / 74 for the foot wells, festoon for the r00f light, t5 / 74 for the ignition, t10 / 194 doors / license plate lights... for pretty much everything else, there is one other type of bulb ba9s I think for the personal map lights beside the cargo festoon on the roof.
Thread
Thread Starter
Forum
Replies
Last Post
Dreamcast
IS - 3rd Gen (2014-present)
18
02-13-18 09:02 AM
rclab1
SC430 - 2nd Gen (2001-2010)
11
01-12-08 11:16 AM