The truth about a timing belt for a '97 LS ?
#1
Rookie
Thread Starter
Join Date: Jan 2007
Location: MA 02643
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
The truth about a timing belt for a '97 LS ?
Question: I have a 97 400LS with 90k miles, which, according to the schedule requires a timing belt change. Has anyone had experience with allowing their car to go longer than this mileage with the original belt? Can it be examined visually to see if it is in good condition or not? Would it make any sense to have the belt examined by someone who is familiar with this timing belt, and if this person stated it was in good condition to continue this practice for another 5000k miles or until such time this experienced person states that it is time to change it?
Any help or suggestions will be greatly appreciated.
Any help or suggestions will be greatly appreciated.
#2
BahHumBug
iTrader: (10)
Question: I have a 97 400LS with 90k miles, which, according to the schedule requires a timing belt change. Has anyone had experience with allowing their car to go longer than this mileage with the original belt? Can it be examined visually to see if it is in good condition or not? Would it make any sense to have the belt examined by someone who is familiar with this timing belt, and if this person stated it was in good condition to continue this practice for another 5000k miles or until such time this experienced person states that it is time to change it?
Any help or suggestions will be greatly appreciated.
Any help or suggestions will be greatly appreciated.
https://www.clublexus.com/forums/sho...92&postcount=7
#3
Maintenance Moderator
iTrader: (2)
no way to tell for sure how long... they are typically over engineered, but it's not something you want to break... follow the guide...
not sure if the LS400 in 97 went to interference or not off top of my head, but if it is an interference engine, if it breaks you are buying yourself a new motor... if it's not an interference engine, if it breaks, you just replace it as well...
not sure if the LS400 in 97 went to interference or not off top of my head, but if it is an interference engine, if it breaks you are buying yourself a new motor... if it's not an interference engine, if it breaks, you just replace it as well...
#4
Lexus Test Driver
Join Date: Mar 2007
Location: San Diego
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
According to PureDrifter's post above, the 2LS 1UZ is an interference engine, so that's not something I'd wanna mess around with. Change your belt, and while you're in there it's a good idea to replace all the other timing components like the tensioner/idler pullies and the water pump as well.
#5
BahHumBug
iTrader: (10)
no way to tell for sure how long... they are typically over engineered, but it's not something you want to break... follow the guide...
not sure if the LS400 in 97 went to interference or not off top of my head, but if it is an interference engine, if it breaks you are buying yourself a new motor... if it's not an interference engine, if it breaks, you just replace it as well...
not sure if the LS400 in 97 went to interference or not off top of my head, but if it is an interference engine, if it breaks you are buying yourself a new motor... if it's not an interference engine, if it breaks, you just replace it as well...
95-00 LS uses 1uz that IS interference.
#6
Driver School Candidate
Join Date: Jan 2007
Location: AZ
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
1UZ-FE is a non-interference engine
The 4.0L engines in the 1989 thru 1997 LS and SC models are NON-INTERFERENCE designs. This can be verified at the Gates site noted in this thread as well as several other authoritative web-sites like lextreme.com.
This makes the decision whether to run your TB beyond the 90K recommended change point rather important. The difference being a broken belt with NO engine damage, or a broken belt and a broken engine!!
You are OK with your 97.
This makes the decision whether to run your TB beyond the 90K recommended change point rather important. The difference being a broken belt with NO engine damage, or a broken belt and a broken engine!!
You are OK with your 97.
#7
BahHumBug
iTrader: (10)
please link to the exact info u have since in my 5+ years of owning an LS i havent seen such info.
well known member and resource JBrady backs up my original statement in this Lextreme post.
http://www.lextreme.com/forums/showp...09&postcount=5
well known member and resource JBrady backs up my original statement in this Lextreme post.
http://www.lextreme.com/forums/showp...09&postcount=5
Trending Topics
#8
Maintenance Moderator
iTrader: (2)
please link to the exact info u have since in my 5+ years of owning an LS i havent seen such info.
well known member and resource JBrady backs up my original statement in this Lextreme post.
http://www.lextreme.com/forums/showp...09&postcount=5
well known member and resource JBrady backs up my original statement in this Lextreme post.
http://www.lextreme.com/forums/showp...09&postcount=5
here's a table of non-interference lexus motors:
#12
Lexus Test Driver
All the information I have gathered has pointed to the 1995-1997 engine being an interference motor, regardless of the information presented by 3rd parties.
#13
Pole Position
iTrader: (3)
my understanding was that the vvt-i motors were interference types and the LS didnt have vvt-i until 98.
maybe the factory service manual has the definitive answer, the engine mechanical section in my manual states:
"Pistons are made of ... , and a depression is built into the piston head to prevent interference with the valves."
maybe the factory service manual has the definitive answer, the engine mechanical section in my manual states:
"Pistons are made of ... , and a depression is built into the piston head to prevent interference with the valves."
#14
BahHumBug
iTrader: (10)
my understanding was that the vvt-i motors were interference types and the LS didnt have vvt-i until 98.
maybe the factory service manual has the definitive answer, the engine mechanical section in my manual states:
"Pistons are made of ... , and a depression is built into the piston head to prevent interference with the valves."
maybe the factory service manual has the definitive answer, the engine mechanical section in my manual states:
"Pistons are made of ... , and a depression is built into the piston head to prevent interference with the valves."
Thread
Thread Starter
Forum
Replies
Last Post
sayow
LS - 1st and 2nd Gen (1990-2000)
12
05-01-14 11:45 AM