CA FS: SSR/Tanabe Featured 2008 Lexus IS F $43,000 OBO
#1
FS: SSR/Tanabe Featured 2008 Lexus IS F $43,000 OBO
After owning my car for over 2 years I’ve decided to sell it (bought it used). I have no plans on replacing it at the moment but I have had lots of fun and met a lot of people on here while owning it. Lexus reliability is something I‘ve come to welcome and appreciate on this car. Apart from a HID bulb that was replaced under warranty I have had no outside expenses apart from regular maintenance with this car.
I will attempt to sell the car as is on here and a few other places. If that fails I will return it to stock and sell it.
Here is a description of what I have on the car as well as some of the modifications that I felt needed to be highlighted. Many of you have seen the car and the following pictures at various points so there’s nothing new here.
PLEASE DO NOT PM with questions about offsets, where I bought XYZ or calling dibs on any parts on the car in the event that it is parted. I will delete any such PM and not respond to you.
PLEASE DO EMAIL me if you are serious about buying the car at boost_addict@yahoo.com. We can discuss any further details or questions you may have.
Please remember that my car is not a ride at Disney so don’t expect to come and get a joy ride.
I’m asking $43,000 OBO this includes all of the following including a Lexus Platinum Service Agreement (extended bumper to bumper warranty) that expires at 100,000K or 04/29/2015 with a $0 deductible. Whichever comes first.
The asking price is based on the modifications, extended warranty, condition of the car and additional parts included. Anyone expecting to make a low ball offer should look elsewhere.
In addition to the aftermarket parts listed on the car the price includes the following OEM parts that were taken off the car:
4 OEM BBS IS F wheels with Bridgestone Potenza tires (with curb damage but not bent wheels, the car was purchased like that)
OEM IS F Steering Wheel
OEM MM IS F rear spoiler
OEM intake (airbox and snorkel)
OEM rear sway bar
OEM ball joints
OEM rear control arms L & R
OEM front door sills
OEM IS F exhaust (includes mid pipes and rear section)
OEM IS F shocks and springs
2008 Lexus IS F
Mileage
53, XXX
Exterior
Mercury Metallic
TOM’s carbon fiber front lip diffuser (replacement that was purchased in July)
TOM’s carbon fiber side skirts
TOM’s carbon fiber rear diffuser
WALD painted fiberglass rear spoiler
EBay carbon roof spoiler
3M clear bra on front bumper, lower hood and door mirrors
Black pearl emblems (except the 3 F logos)
Interior
TOM’s GT Shifter
Blitz throttle controller
3M Crystalline on all windows including the windshield
OEM Lexus blue illuminated door sills
OEM LS460 door locks
OEM clear door lenses with LED bulbs
LED interior dome lights.
V1 rear view mirror mount (V1 not included)
OEM Lexus rear cargo net
OEM Lexus Navigation with Mark Levinson
OEM XM satellite radio
Navigation Override (same thing Prestigious Society sells)
Custom JPM Coachworks leather and Alcantara wrapped steering, also made to OEM M3 diameter.
Suspension
KW Variant 3 IS F specific coilovers
F Sport rear sway bar
Cusco Front and rear shock tower bars
SPC front camber ball joints
FIGS rear camber arms with race end links.
Wheels
SSR Professor SP1 with custom color
20 X 9 front +37
20 X 10.5 rear +43
Nitto Invo 245/30/20 and 285/25/20 (the tires were purchased in April and have less than 3K on them) The car will also come with 2 NEW unmounted Nitto Invo front tires and 1 NEW unmounted rear Nitto Invo tire in the sizes listed above.
Performance Modifications
AFe/Takeda Stage 2 intake with black wrinkle coating (installed in April)
HKS SSM rear section with HKS off road mid pipes
This is the car that HKS used to test fitment on the SSM rear section in the U.S. The mid pipes with the secondary cats were prototyped on this car to be sold by HKS worldwide.
Brakes
Project MU NS compound brake pads
Motul RBF600 brake fluid
Accomplishments
2011 Tanabe catalog cover
2012 SSR JDM wheel catalog
2011 SSR wheel catalog
Cusco USA prototype car used to confirm IS F shock tower bar fitment.
Nitto ad campaign photo shoot (shot in April and to be released)
HKS USA prototype car used for the worldwide release of their mid pipes for the IS F and fitment of the SSM rear section for the IS F.
HKS USA website featuring the IS F SSM exhaust
http://www.youtube.com/watch?v=f7-oD..._order&list=UL
I will attempt to sell the car as is on here and a few other places. If that fails I will return it to stock and sell it.
Here is a description of what I have on the car as well as some of the modifications that I felt needed to be highlighted. Many of you have seen the car and the following pictures at various points so there’s nothing new here.
PLEASE DO NOT PM with questions about offsets, where I bought XYZ or calling dibs on any parts on the car in the event that it is parted. I will delete any such PM and not respond to you.
PLEASE DO EMAIL me if you are serious about buying the car at boost_addict@yahoo.com. We can discuss any further details or questions you may have.
Please remember that my car is not a ride at Disney so don’t expect to come and get a joy ride.
I’m asking $43,000 OBO this includes all of the following including a Lexus Platinum Service Agreement (extended bumper to bumper warranty) that expires at 100,000K or 04/29/2015 with a $0 deductible. Whichever comes first.
The asking price is based on the modifications, extended warranty, condition of the car and additional parts included. Anyone expecting to make a low ball offer should look elsewhere.
In addition to the aftermarket parts listed on the car the price includes the following OEM parts that were taken off the car:
4 OEM BBS IS F wheels with Bridgestone Potenza tires (with curb damage but not bent wheels, the car was purchased like that)
OEM IS F Steering Wheel
OEM MM IS F rear spoiler
OEM intake (airbox and snorkel)
OEM rear sway bar
OEM ball joints
OEM rear control arms L & R
OEM front door sills
OEM IS F exhaust (includes mid pipes and rear section)
OEM IS F shocks and springs
2008 Lexus IS F
Mileage
53, XXX
Exterior
Mercury Metallic
TOM’s carbon fiber front lip diffuser (replacement that was purchased in July)
TOM’s carbon fiber side skirts
TOM’s carbon fiber rear diffuser
WALD painted fiberglass rear spoiler
EBay carbon roof spoiler
3M clear bra on front bumper, lower hood and door mirrors
Black pearl emblems (except the 3 F logos)
Interior
TOM’s GT Shifter
Blitz throttle controller
3M Crystalline on all windows including the windshield
OEM Lexus blue illuminated door sills
OEM LS460 door locks
OEM clear door lenses with LED bulbs
LED interior dome lights.
V1 rear view mirror mount (V1 not included)
OEM Lexus rear cargo net
OEM Lexus Navigation with Mark Levinson
OEM XM satellite radio
Navigation Override (same thing Prestigious Society sells)
Custom JPM Coachworks leather and Alcantara wrapped steering, also made to OEM M3 diameter.
Suspension
KW Variant 3 IS F specific coilovers
F Sport rear sway bar
Cusco Front and rear shock tower bars
SPC front camber ball joints
FIGS rear camber arms with race end links.
Wheels
SSR Professor SP1 with custom color
20 X 9 front +37
20 X 10.5 rear +43
Nitto Invo 245/30/20 and 285/25/20 (the tires were purchased in April and have less than 3K on them) The car will also come with 2 NEW unmounted Nitto Invo front tires and 1 NEW unmounted rear Nitto Invo tire in the sizes listed above.
Performance Modifications
AFe/Takeda Stage 2 intake with black wrinkle coating (installed in April)
HKS SSM rear section with HKS off road mid pipes
This is the car that HKS used to test fitment on the SSM rear section in the U.S. The mid pipes with the secondary cats were prototyped on this car to be sold by HKS worldwide.
Brakes
Project MU NS compound brake pads
Motul RBF600 brake fluid
Accomplishments
2011 Tanabe catalog cover
2012 SSR JDM wheel catalog
2011 SSR wheel catalog
Cusco USA prototype car used to confirm IS F shock tower bar fitment.
Nitto ad campaign photo shoot (shot in April and to be released)
HKS USA prototype car used for the worldwide release of their mid pipes for the IS F and fitment of the SSM rear section for the IS F.
HKS USA website featuring the IS F SSM exhaust
http://www.youtube.com/watch?v=f7-oD..._order&list=UL
Last edited by N54MPower; 02-03-12 at 09:01 AM.
Trending Topics
#15
Thank you!
Time to move on Cary!
Thanks, I really appreciate it.
Thanks!
Thanks for the kind words.
Wow! I did what I liked and it makes me to happy to hear that you and others appreciate it as much as I do.
Thank you very much!
I think it is and I'm glad others like yourself like it as well.
You already have all the balla WALD parts on your car.
Thank you!
Thank you!
The comments are much appreciated as well as the bump.
Got your PM and responded. Please email me as requested.
I just added a few videos to the listing that HKS made during testing of the exhaust.
Time to move on Cary!
Thanks, I really appreciate it.
Thanks!
Thanks for the kind words.
Wow! I did what I liked and it makes me to happy to hear that you and others appreciate it as much as I do.
I think it is and I'm glad others like yourself like it as well.
You already have all the balla WALD parts on your car.
Thank you!
Thank you!
The comments are much appreciated as well as the bump.
Got your PM and responded. Please email me as requested.
I just added a few videos to the listing that HKS made during testing of the exhaust.