Bumper clip broken
#1
Lead Lap
Thread Starter
Bumper clip broken
Has anyone run into this problem? My dumb **** almost ripped off my bumper cover. Now one tab, closest to tire, is almost broken all the way off. The corner does not stay in place anymore. I've tried melting the plastic tab back on but did not work. You guys have any sugg to how I can secure the corner back? I'm trying to avoid taking it to a body shop by doing it myself. Also trying not to ghetto rig it.
#3
Lead Lap
Thread Starter
Lol. Im lost on moving the tab. Ok so just leave it where it is and drill a new hole and secure with a screw? ok I think I got it. Yeah I've never had stretched tires before, but I'm learning. ***** kinda sucks with all the work just to lower the damn thing, w/19's. Maybe I'm ol'skool but all this neg camber, angled, wheels have me trippin. I know it's the latest craze but dang man. Too each is own. I commute in my ride so I'm not about to change these tires out yearly.
#4
Intermediate
iTrader: (8)
Don't take the front of that huge bumper retainer off. You'll break them and it'll cost like 70$ a side.
Don't make a square cut. Make it diagonal like in the picture. Just trust me on this one.
Post #46. You're welcome.
http://www.wrongfitmentcrew.com/foru...ods-quot/page3
Don't make a square cut. Make it diagonal like in the picture. Just trust me on this one.
Post #46. You're welcome.
http://www.wrongfitmentcrew.com/foru...ods-quot/page3
#5
bringing back a old thread...previous owner decided to superglue the left side of the front bumper, the main clip where a bolt should be place is clean gone...anyone know how to zip tie this of any sort?
http://i47.photobucket.com/albums/f1...r/IMG_0660.jpg
Picture taken from http://www.wrongfitmentcrew.com/foru...ods-quot/page3
http://i47.photobucket.com/albums/f1...r/IMG_0660.jpg
Picture taken from http://www.wrongfitmentcrew.com/foru...ods-quot/page3
#6
Pole Position
iTrader: (9)
bringing back a old thread...previous owner decided to superglue the left side of the front bumper, the main clip where a bolt should be place is clean gone...anyone know how to zip tie this of any sort?
http://i47.photobucket.com/albums/f1...r/IMG_0660.jpg
Picture taken from http://www.wrongfitmentcrew.com/foru...ods-quot/page3
http://i47.photobucket.com/albums/f1...r/IMG_0660.jpg
Picture taken from http://www.wrongfitmentcrew.com/foru...ods-quot/page3
Check my Build for more into and pics, link in my sig
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
GregoryNP
LS - 4th Gen (2007-2017)
4
08-29-17 12:04 PM
AndyG
ES - 1st to 4th Gen (1990-2006)
1
04-17-10 06:55 AM