When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Correct plastic welds hold the top and bottom parts together. I grinded the top of the welds off and I used small short screws to reassemble them. You can find vinyl at your local fabric store. The good thing about wrapping the door panels is that it is pressed in at all sides and there are no wild angles except at the door bar. Unfortunately I didn't document much of this project.
No worries. I just didn't know what to do after grinding the plastic welds off. I'm excited to get this done. Thanks a lot.