Euro Tek Wheels...any experience?
#1
Lexus Champion
Thread Starter
Euro Tek Wheels...any experience?
Found these wheels for $999 which is cheaper than wheeldude's LC818. Looks similar, but not sure. Anybody have any experience with these Euro Tek wheels?
http://www.elementwheels.com/proddet...hseur-021995hs
They are available in
Bolt Pattern : 5x114.3
STAGGERED Size : FRONT :19x8.5 / REAR: 19X9.5
Offset : FRONT :45MM / REAR:40MM
http://www.elementwheels.com/proddet...hseur-021995hs
They are available in
Bolt Pattern : 5x114.3
STAGGERED Size : FRONT :19x8.5 / REAR: 19X9.5
Offset : FRONT :45MM / REAR:40MM
#5
I havent heard of eurotek but Im familiar with avantgarde and vmr....I saw those after I've installed my rims
but I'm happy with my avantgarde
check my thread
but I'm happy with my avantgarde
check my thread
Last edited by potatosink; 04-17-11 at 12:40 AM.
#6
Driver
iTrader: (7)
they dont look similar at all. i guess with so many wheels having a mesh design its hard to distinguish sometimes but the lc818 are more concave looking and the way some of the spokes are pointing toward the outer rim are different. dont get me wrong they look nice but defenetly like the lc818. if ur looking for cheaper looking lc818's go on ebay and type in miro 111. their the exact same design as the lc818's just cheaper
Trending Topics
#8
Driver
iTrader: (7)
http://cgi.ebay.com/ebaymotors/19-Mi...#ht_6420wt_941
these right here are the same bolt pattern as our cars. pretty much anything that fit the g35s and 350z's is most likely gonna fit ours. the offset is a little aggressive but its up to you on how you want it to look. you can google the miro's and find other websites that have different options or you could contact the seller and ask if there are other offsets offered. this particualr seller im showing you actually is located about a 30 min drive from me lol.
these right here are the same bolt pattern as our cars. pretty much anything that fit the g35s and 350z's is most likely gonna fit ours. the offset is a little aggressive but its up to you on how you want it to look. you can google the miro's and find other websites that have different options or you could contact the seller and ask if there are other offsets offered. this particualr seller im showing you actually is located about a 30 min drive from me lol.
#9
If you like the design of those Euro tech wheels then look into TSW Nurburgrings. I'm not sure if it makes a difference but the TSW's are rotary forged vs a cast wheel. Apparently, this is what makes them really light yet able to maintain its strength. I've got them in a 19 inch matt gunmetal and can say they are almost identicle to the Eurotechs.
#10
Driver School Candidate
Join Date: Dec 2009
Location: ca
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Euro-Tek wheel information
Guys just incase you have been wondering i recently found out euro-Tek wheels is actually part of MRR Wheels. i was told that euro-Tek is a new line for the company, you can actually contact them and they can tell you what specs are available. as of today heres what i got
Mesh design is available in Matte Black and Hyper Silver 19" staggered
they make it for BMW,Lexus,Infinity and all the common lowet and high et 5x114.3 fitments.
on a personal side ive also seen advertisement on the bimmer mag and heavy hitters and confirmed is from MRR Wheels.
they supposed to email me a picture of a IS250 with these on but since im new i cant realy post it up.
Mesh design is available in Matte Black and Hyper Silver 19" staggered
they make it for BMW,Lexus,Infinity and all the common lowet and high et 5x114.3 fitments.
on a personal side ive also seen advertisement on the bimmer mag and heavy hitters and confirmed is from MRR Wheels.
they supposed to email me a picture of a IS250 with these on but since im new i cant realy post it up.
#11
http://www.mbworld.org/forums/s-clas...eels-ebay.html
^ That's the only negative thing i can find about them. Seems like their customer service sucks!
^ That's the only negative thing i can find about them. Seems like their customer service sucks!
Thread
Thread Starter
Forum
Replies
Last Post
bryant2201
SC- 1st Gen (1992-2000)
12
05-03-11 05:37 PM