mrAkana

iTrader: (1)

I can't speak on fitment for the Work setup but from what I gathered when trying to get my fitment was that it wouldn't be an issue for your dimensions. Since the offset is close to factory of a +45, putting a +38 is putting you a 1/4" closer to the fender which would still give you plenty of room.

See what you could find in this two threads:
https://www.clublexus.com/forums/is-...ls-on-2is.html

https://www.clublexus.com/forums/is-...el-thread.html

My current setup is 18x10 +25 lowered on springs, 225/40 255/40 with occasional rubbing on harsh dips but I have no fender mods although I do plan on rolling the rears just a touch when I get my BC.

lysis250

iTrader: (18)

I had Avant Garde M310 on my car size was 18x8.5 +35 in the front, 18x9.5 +40 in the rear. The front was very good the tears however could have been pushed out a little more for a more flush figment, with your +38 it will be very nice. I also ran 225/40/18 front and 255/40/18. I was lowered about 1 finger gap all around and didn't have any problems, however when I got my coil overs the previous owner was lower and with my wheels I rubbed in the front on turns, only took it for a spin once at that height and raised the car right after that.

aandyxp

Thank you very much. It's just I have no finger gap for my rears and wonder if the 18x9.5 will poke out too much.

aandyxp

Do you have a picture of how low you were ? People said I should be fine but it really depends on how low I am. I don't want it to rub on every turn

lysis250

iTrader: (18)

Found one. I'm sure you will be fine, if you can imagine 1 finger gap between fender and top of tire.

aandyxp

I'm guessing with the new wheels. It'll stick out more than stock wheels. My car is much lower so I'll have to raise it

woohoo72

After driving in snow with my IS 250 couple times. I am considering snow tires.
It has stock F 225/45/17 and R 245/45/17. Would 215/60/16 fit on my IS250?
It would be almost an inch larger in diameter on the front and a half an inch on the back.

ms2619

iTrader: (5)

Found a really nice set of Vossen CV7s for a good price but the owner has 20x10.5 +45 all the way around...can this fit a 08 IS350 RWD lowered on h&r springs ?

jordannnx

hey guys,

so I currently have a 2002 is300. I just bought 17x9 +25 offset rims, and I'm wondering what tires would be good to give me just a little stretched look?

I'm also lowered on BC coilovers BR type, no rolled fenders. hoping to find a look that will allow me keep my fenders unrolled. but if I have to, I can! let me know what's up.

albertgoq

How bout the rears on 18x9.5 +38 265 tire width?

would 255's stretch on 9.5 rims?

kwanye

iTrader: (4)

Anyone know if I will have rubbing problems with 19x9.5 +20 and 19x10.5 +27? I'm also lowered about 2 inches on megan EZ's. Thanks in advance!

dyongg

iTrader: (1)

I'm tucking about half my tire on 18 stock lobster claws. Can I fit these wheels with just a fender roll & possibly pull?

19x9.5 +22 with 225/35/19
19x10.5 +22 with 245/35/19

Thanks!

is25019

hey i have a 2011 RWD is250, thinking of getting rims off this guy who has a AWD is250, setup is Forged Rims 18x9 +40, will this work or do i need to do a staggered setup, order wider rims in back, or just put wider tires in back with same rims?, new to this car thing wanna get it right

Sportskid1

iTrader: (1)

Those should work for you as they are not a very aggressive offsets. I am running a square setup on my is350 with 18X8.5 +35 running 255/35/18 on all corners. No rubbing and seems to work great. I am lowered to about 1.5 fingergap.

nfordhk

iTrader: (2)

Can someone give me advice on:

2011 IS350 FSport
19x10 Offset +2 3.5" Lip
19x11 Offset +9 4.5" Lip

I have an Fsport big brake kit.