When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
AIT Racing makes them. Around $700 for the sides and rears.
I don't think TE37's or CE28's will ever die :-)
lol yeah you right man. cant really get tired of either set really
Originally Posted by ccdan
245/35/19 and 265/30/19's will stretch almost the same. Shorter sidewall needs less of a width difference in order to stretch. Taller the side wall the more difference is needed..
Originally Posted by laobo979
Ccdan dame tucking 275 car looks clean. I rub 19x10.5+22 Volk TE 245/35 on the rear bumper tab. I'm debating on getting the figs kit to get my camber adjusted. I rather run 265/30 if I can myself.
that was exactly what i opted for on my rear 11", a 265/30 vs a 245/35. lets me tuck a tad easier
Jdmsw20 what you running for camber? And camber kit?
i just have the rear megan camber arms and thats it. i have a few turns left in em, but, im going to max them out here soon so i can go about a 1/2" lower front and rear. i know im about -4.5 in the rear easily
First off, I do want to apologize for the crappy iphone Instagram picture, No money for a quality rebel, but
In the picture CCW LM5 18x11.5 -7 Rears, i dont have fronts installed because i am waiting for my Front camber kit, but front specs will be 18x10.5 +3 with 5mm spacer to clear the brakes
I do need some helpin figuring out what wheels came with my car when i purchased it PM and i'll send you a picture
First off, I do want to apologize for the crappy iphone Instagram picture, No money for a quality rebel, but
In the picture CCW LM5 18x11.5 -7 Rears, i dont have fronts installed because i am waiting for my Front camber kit, but front specs will be 18x10.5 +3 with 5mm spacer to clear the brakes
I do need some helpin figuring out what wheels came with my car when i purchased it PM and i'll send you a picture
I like the fitment and all, but are you sure that's the spec on the rears? I have pretty aggressive rears myself, but not nearly a 11.5-7, I've never seen anyone come close to that without wide body. Just curious
I like the fitment and all, but are you sure that's the spec on the rears? I have pretty aggressive rears myself, but not nearly a 11.5-7, I've never seen anyone come close to that without wide body. Just curious
yeah i was going to ask the same thing. the rear isnt still stock body is it? i only ask because it looks more flared than simple roll/pull. because i too have an aggressive 11 rear and its barely fitting with just pull/roll and alot of camber lol
I like the fitment and all, but are you sure that's the spec on the rears? I have pretty aggressive rears myself, but not nearly a 11.5-7, I've never seen anyone come close to that without wide body. Just curious
Its surely not stock body, im currently running 18x10.5+3 front and 11.5-7 rears, the rear wheels that originally came with the car was 18x9.5 -28 offset, i said that correctly -28 lol, still trying to findout who makes the wheel, all it states is JAWA on the rim and made in Japan
Originally Posted by jdmSW20
yeah i was going to ask the same thing. the rear isnt still stock body is it? i only ask because it looks more flared than simple roll/pull. because i too have an aggressive 11 rear and its barely fitting with just pull/roll and alot of camber lol
any insight would be dope
Previous owner did the bodywork, i do not approve of the way he did it, he practically molded everything except the front bumper, sides and rear bumper and walds wing is molded, and ALSO cut and rewelded the STOCK Camber arm and Toe arm to achieve the stance in the picutre, but overall i traded in my 06 IS250 with 190k miles for this 07 is350 with 98k miles. I'd wish i could tell you what he done to achieve this setup, I am running megan suspension all around, Front Camber arm, Rear Traction Rod, Rear Toe and Camber arm, i'll post more higher quality pictures once I get the setup i want dialed in.