2 techs came to set up homelink, and both failed
#16
Super Moderator
Is there a manufacturer and/or model number on the original transmitter? Post it to the thread- perhaps someone else has the same system and can report their success or failure.
#18
Lexus Champion
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: CA
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
ok here we go.. this is the picture of my gate and the box..maybe the learn button is there..
oh there's this word on the box: CHAMBERLAIN. does it tell you anything?
hm..do I need a key to rip that box apart?
oh there's this word on the box: CHAMBERLAIN. does it tell you anything?
hm..do I need a key to rip that box apart?
#23
yah CHAMBERLAIN have rolling codes especially the gates. I have the same gate for my house. There is a little key slot on the box and inside there should be a little purple button. Once press because the tech should of already programed the remote into your car so all you have to do is press the button on the mirror two to three times and bingo. This is up to the apt. manager to let u into that box or not
#24
here is the manuals saved u the trouble heres a pick of the learn button. http://www.liftmaster.com/consumerwe...cs/0150388.pdf
The one you have is the 1hp one i have the smaller one but it should be the same because its the same brand and model but yours is just more beffy make sure you dont hold down the learn button on the gate or else the apt owner will be pissed it will clear all the codes in the remotes. Press it and let go then run to your car and tap the button on the rearview mirror two to three times and bingo hope this helps
The one you have is the 1hp one i have the smaller one but it should be the same because its the same brand and model but yours is just more beffy make sure you dont hold down the learn button on the gate or else the apt owner will be pissed it will clear all the codes in the remotes. Press it and let go then run to your car and tap the button on the rearview mirror two to three times and bingo hope this helps
#25
Lexus Champion
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: CA
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
yah CHAMBERLAIN have rolling codes especially the gates. I have the same gate for my house. There is a little key slot on the box and inside there should be a little purple button. Once press because the tech should of already programed the remote into your car so all you have to do is press the button on the mirror two to three times and bingo. This is up to the apt. manager to let u into that box or not
#26
Lexus Champion
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: CA
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
here is the manuals saved u the trouble heres a pick of the learn button. http://www.liftmaster.com/consumerwe...cs/0150388.pdf
#27
well now i just edited my post but if the tech did not press the two outter button on your remote then the code on your rearview is still good. All you have to do is press the learn and press the button the the rearview two-three times and bingo :P
#28
plus i dont think the lexus tech would know much to do with it so i would not trust them at all you have to do is follow the instruction on here to program the remote then have the manager open the box then press the learn and press ur button 2-3 times then it should work if you have any more problems ask me i got the same gate
#29
Lexus Champion
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: CA
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
plus i dont think the lexus tech would know much to do with it so i would not trust them at all you have to do is follow the instruction on here to program the remote then have the manager open the box then press the learn and press ur button 2-3 times then it should work if you have any more problems ask me i got the same gate
#30
Lexus Champion
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: CA
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
drunkebuda, in the pdf file it says press and hold the button on the hand held remote. should I press and hold the homelink button on my car or just press-and-release it for 2-3 times?