need all the wiring experts HELP!!!
#1
Rookie
Thread Starter
Join Date: Dec 2012
Location: Fl
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
need all the wiring experts HELP!!!
I have a 01 is300 and the cluster lights turn on but none of the needles work ... Also my security light keeps flashing even after I unplug the theft box ...
#2
Maintenance Moderator
iTrader: (2)
checked fuses, etc, I assume???
does the car start and run?
Initial thought is something wrong with the ECU, but the tachometer is not driven off the ECU, and if the engine runs, but the tach does not, then the ecu might still be bad, but there is something else wrong as well...
does the car start and run?
Initial thought is something wrong with the ECU, but the tachometer is not driven off the ECU, and if the engine runs, but the tach does not, then the ecu might still be bad, but there is something else wrong as well...
#4
Rookie
Thread Starter
Join Date: Dec 2012
Location: Fl
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
I tried to reset the battery... The cats runs and drives great just that none of the needles read.. And the gear display doesn't show. All the lights light up tho ..that's why I'm stuck
#5
Driver School Candidate
Join Date: Apr 2014
Location: Hawaii
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
There is also a plug that controls your dash odometer reading. Might be unplugged or bad harness. Not sure what the plug is called but it is located by your trans. Try search "odometer plug engine bay is300." It's illegal to unplug this plug cause it stops your odometer reading (if unplugged/damaged tach and speed needles don't work).
#7
Driver School Candidate
Join Date: Apr 2014
Location: Hawaii
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Rookie
Thread Starter
Join Date: Dec 2012
Location: Fl
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
OK I think its either a wiring issue or BC I removed my abs... Idk bit I got all the lights in the cluster working ..still no needles work ..also the odometer screen is blank ...
Thread
Thread Starter
Forum
Replies
Last Post
JGWentwrth
LS - 3rd Gen (2001-2006)
1
09-17-18 04:30 PM