On-going 2IS Issue - SHIELD, REAR FLOOR HOUSING
#1
Tech Info Resource
Thread Starter
iTrader: (2)
On-going 2IS Issue - SHIELD, REAR FLOOR HOUSING
Ever since I first had this issue on my IS350, it has been problematic. Lexus calls the part SHIELD, REAR FLOOR HOUSING. It is held on by a plastic grommet with a screw and one very expensive CLIP, ROCKER PANEL MOULDING.
I have bought more than one of these things over time to replace the ones which have disappeared - and I mean lock, stock, and barrel. I have to order the plastic grommet, the screw, the clip, and the part itself.
I know these devices are purely to enhance aerodynamics, but it would seem they either do something to reduce fuel consumption, or Lexus put these on the car just to make us buy parts to routinely replace them. Very annoying. Anyway, in case anyone needs these parts, I've listed them here. I have also bought a box of 15 of the very expensive clips from www.clipsandfasteners.com for $12 - way cheaper than the $7.42 I paid for just one at the local Lexus dealer, and way cheaper than any Lexus Internet retailer.
SHIELD, REAR FLOOR HOUSING (RH) - 57497-53050
SHIELD, REAR FLOOR HOUSING, NO.2 (LH) - 57498-53050
Standard part (grommet) 90189-06172
Standard part (screw) 90159-60507
CLIP, ROCKER PANEL MOULDING - 75867-30120
My bet is, if 50 members went out and looked for this part on their cars, they would find it missing completely from at least one side. I surely wish I knew why they refuse to stay on the car.
Not the black arrow - the dingy looking plastic piece hanging down in front of the tire.
2IS Forum post - same issue
I have bought more than one of these things over time to replace the ones which have disappeared - and I mean lock, stock, and barrel. I have to order the plastic grommet, the screw, the clip, and the part itself.
I know these devices are purely to enhance aerodynamics, but it would seem they either do something to reduce fuel consumption, or Lexus put these on the car just to make us buy parts to routinely replace them. Very annoying. Anyway, in case anyone needs these parts, I've listed them here. I have also bought a box of 15 of the very expensive clips from www.clipsandfasteners.com for $12 - way cheaper than the $7.42 I paid for just one at the local Lexus dealer, and way cheaper than any Lexus Internet retailer.
SHIELD, REAR FLOOR HOUSING (RH) - 57497-53050
SHIELD, REAR FLOOR HOUSING, NO.2 (LH) - 57498-53050
Standard part (grommet) 90189-06172
Standard part (screw) 90159-60507
CLIP, ROCKER PANEL MOULDING - 75867-30120
My bet is, if 50 members went out and looked for this part on their cars, they would find it missing completely from at least one side. I surely wish I knew why they refuse to stay on the car.
Not the black arrow - the dingy looking plastic piece hanging down in front of the tire.
2IS Forum post - same issue
#2
Yeah, I have to periodically take mine off to clean out the little bits of gravel and road that get stuck between the "shield" and "floor" as it gets loose, I've been lucky I haven't lost one yet though.
#3
Lexus Fanatic
I was wondering what the deal was. I had the same issue and was wondering if the car had previous body work. Glad to know its normal. I just took it in and they replaced the 3 that we're missing in 10 min
#5
Racer
iTrader: (3)
I actually noticed mine missing a few months ago from the drivers side, and had to buy a replacement. I figured something caught me under the car, but it's good (bad) to know it's an actual issue.
I don't know how long I was driving without one, and I don't recall noticing anything different, but I figured it did something, so back on it went.
I don't know how long I was driving without one, and I don't recall noticing anything different, but I figured it did something, so back on it went.
Trending Topics
#8
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
I heard they replaced the clip with an updated stronger one not long ago..
I've already replaced the push clips once, never had another problem since.. with new clips..
Joe Z
I've already replaced the push clips once, never had another problem since.. with new clips..
Joe Z
#10
Lexus Fanatic
#11
Racer
Ok it took me sometime to understand what the picture was showing, since I was looking at the black arrow.
But if you're talking about the mud flap behind the rear wheels then yes I agree, my driver side one has been loose for a few months and now it's just vanished.
I'm planning on installing a new one but adding some 3M tape and I'm sure it'll never come of.
Wherever I've used 3M tape on has held on solid and never come off, unless I rip it off the car.
But if you're talking about the mud flap behind the rear wheels then yes I agree, my driver side one has been loose for a few months and now it's just vanished.
I'm planning on installing a new one but adding some 3M tape and I'm sure it'll never come of.
Wherever I've used 3M tape on has held on solid and never come off, unless I rip it off the car.
Last edited by Defratos; 10-04-14 at 01:24 PM.
#12
Tech Info Resource
Thread Starter
iTrader: (2)
Ok it took me sometime to understand what the picture was showing, since I was looking at the black arrow.
But if you're talking about the mud flap behind the rear wheels then yes I agree, my driver side one has been loose for a few months and now it's just vanished.
I'm planning on installing a new one but adding some 3M tape and I'm sure it'll never come of.
Whatever I've used 3M tape on has held on solid and never come off, unless I rip it off the car.
But if you're talking about the mud flap behind the rear wheels then yes I agree, my driver side one has been loose for a few months and now it's just vanished.
I'm planning on installing a new one but adding some 3M tape and I'm sure it'll never come of.
Whatever I've used 3M tape on has held on solid and never come off, unless I rip it off the car.
#13
Tech Info Resource
Thread Starter
iTrader: (2)
I went to Autozone on Sunday and got some 3M trim adhesive - the double sided gray sticky foam - and I put it on today after cleaning everything with soap and water. They are a lot more rigid with tape on them. Hopefully it puts an end to having them separate from the car at random intervals.
Time will tell. I'll update in a few months.
Time will tell. I'll update in a few months.
#14
Lead Lap
iTrader: (2)
My IS350 is missing this part completely on the passenger side. Like I8ABMR I thought mine was missing due to previous body work, because I know my car has had some work on the passenger side.
It is on my wishlist, but haven't got around to ordering a replacement, partly due to the cost of the clips, so thanks for the cheaper source!
It is on my wishlist, but haven't got around to ordering a replacement, partly due to the cost of the clips, so thanks for the cheaper source!
Last edited by WylieKylie; 10-08-14 at 03:18 PM.
#15
Pole Position
Join Date: Oct 2008
Location: Socal - 626
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
I went to Autozone on Sunday and got some 3M trim adhesive - the double sided gray sticky foam - and I put it on today after cleaning everything with soap and water. They are a lot more rigid with tape on them. Hopefully it puts an end to having them separate from the car at random intervals.
Time will tell. I'll update in a few months.
Time will tell. I'll update in a few months.