Has anyone had custom headers made for their isf?
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2016
Location: florida
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone had custom headers made for their isf?
just curious if anyone has had custom headers made for their isf? Gotta be more people out there than just PPE and SIKKY.
#2
Pole Position
Novel in Japan made some equal length headers for the ISF but were major $$$$
#3
Driver School Candidate
Thread Starter
Join Date: Sep 2016
Location: florida
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
lol yea i know but novel and icode are out of the question. Hence why i dont even bother mentioning them...So much badassness but soo much benjamins lol
#4
Pole Position
Back to your question, I don't recall or ever hearing of another manufacturer making headers for the ISF other than Sikky & PPE here in the U.S.
#6
I see you're in Florida. Why don't you hit up LHT Performance and see if they could be something for you? Their work is top notch.
http://lhtperformance.net/documents/headers.html
http://lhtperformance.net/documents/headers.html
#7
Driver School Candidate
Thread Starter
Join Date: Sep 2016
Location: florida
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I see you're in Florida. Why don't you hit up LHT Performance and see if they could be something for you? Their work is top notch.
http://lhtperformance.net/documents/headers.html
http://lhtperformance.net/documents/headers.html
Trending Topics
#8
Before going with Sikky I went to a shop here specialized in turbo manifold and custom headers fabrication.
Was quoted 1400$ in material for top quality collectors and another 1500$ in labor.
Didn't really make sense compared to production headers like PPE and Sikky.
Was quoted 1400$ in material for top quality collectors and another 1500$ in labor.
Didn't really make sense compared to production headers like PPE and Sikky.
#9
Exactly! Why reinvent the wheel when a ton of R&D has already been put into creating a quality set of headers for our car. In the end, you are probably going to get a product that is very similar (if not the same) as whats already on the market, but for two to three times the price.
#10
Exactly! Why reinvent the wheel when a ton of R&D has already been put into creating a quality set of headers for our car. In the end, you are probably going to get a product that is very similar (if not the same) as whats already on the market, but for two to three times the price.
This was for an equal length setup. Which at the time was more like a Novel.
Fit quality on the Sikky was also "pretty normal" and with a custom one these aspects are taken care of.
Thread
Thread Starter
Forum
Replies
Last Post
jt321
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
1
01-20-17 09:29 PM