Vervish

iTrader: (4)

Nope..no clockspring in either the Suby (I had a Spec B Legacy) or the F.

Evil Teo

iTrader: (13)

nice writeup!!! im hesitant on the new steering wheel...

Vervish

iTrader: (4)

Yeah..you should check it out before comitting. I might be around this weekend..i will message you.

Raybean

iTrader: (3)

nice write-up. Now i just have to justify the cost of a steering wheel.

vietzboi87

iTrader: (2)

So the thickness of both wheels are the same? The only difference is the flat bottom? I love my old m3 steering wheel because of how thick the grip is, I wonder if there's any like that for our isf.

Vervish

iTrader: (4)

Yea, the thickness from the 9 to 3 o'clock position is the about the same as my stock wheel. The bottom half is slightly thicker and the there are meaty thumb rests right at 3 and 9. FWIW, I think the 2011 stock steering wheel is thicker than the 2008. So I imagine it might be slightly thicker than what you have now.

Meraki Autoworks

iTrader: (8)

Any pointers when installing the wheel? Gonna perform this tomorrow afternoon. Or is this thread pretty much all i need to know?

Vervish

iTrader: (4)

This pretty much covers it. Make sure you have the proper tools to remove the wheel (as shown in the vid) and work slowly. The whole process should take you <1 hour.

Titinium

Does anyone know if a 2009 stock wheel will fit a 2011? Do the years matter on the wheel?

flowrider

iTrader: (9)

^^^^Answers to your questions - Yes and No.

However the sport button was moved (I believe in 2012) from the dash to the steering wheel. The controls are not part of the steering wheel however, and are mounted independently. So yes, any ISF steering wheel or any ISX50 second generation steering wheel will fit any ISF.

Lou

Titinium

^^^^Awesome thank you Lou, exactly what I needed!

Vervish

iTrader: (4)

FYI - The sport button was relocated to steering wheel in 2011.

s4play

iTrader: (2)

Nice write-up!

here's my custom wheel from my R8, it was ordered to be 4mm thicker than stock and had the top and bottom flat for more grip. You should get something like this for your IS-F!

flowrider

iTrader: (9)

^^^^Hey guy, how are you doing? Your wheel looks nice, but It's something I wouldn't do. The carbon fiber at the top is just not for me. I would much rather grip leather. Attached is a pict of the the wheel I had built for me by Forum Vendor DCTMS. IMHO, Gotta have leather on top.

Lou

Todd Edge

iTrader: (2)

Amazing write up! I just used this to install an IS-F on a IS350. Thanks for all the pictures and details!