tas02

iTrader: (2)

+1 for the 18" Advans, jdsong, lookin' sweet.

Which coilovers are goin' on?

Sevenfold

I love that look with the fat sidewall! Looks badass!

hyboost

iTrader: (4)

I'm back on one of the early pages in this post from 2012 when I first got the ADV1's. They were originally brushed face with chrome lips.




Had them sent back to ADV1 to get refinished in titanium with brushed gunmetal lips for a little change up. And recently painted the calipers red too...

blackisF08

iTrader: (2)

here is mine

ljdsong

iTrader: (1)

Thanks for the praise! Budget is so tight right now, too many mods in mind, carbon fiber hood, steering wheel and im leaning forward to bc with swift upgrade for now. My goal is to make the F more lighter.
Leo

Fuzzyoner

Nice ADV1's hyboost
Very nice wheel selection

What are the wheel/tire specs?

hyboost

iTrader: (4)

Thanks. Used to do HRE on all the cars but recently ended up ADV1 on both cars.
Specs on the ISF ADV1's are...

ADV5.0 Track Spec
20x9.5 ET37
20x11 ET52

Front tires are Michelin Pilot Super Sport 245/30/20
Rear tires are Michelin Pilot Super sport 285/25/20 (I usually run 295/25/20 PSS but they were on back order so was forced to stretch a little for now)

autoz4me

Looking foward to seeing these pics.

I reckon a square setup 19 X 9.5' +40 would look really good.

Possibly running a staggered tyre setup 275,285 out the back and 255 up front.

i reckon the 9.5 fills the front wheel arch up nicely while widening the track.

Fuzzyoner

Thanks for the info!!

Maskaveli

Hello F Lovers, wondering if someone can help me verify some specs please? I love the look of the 20's but I'm tired of burning through tires so quick and want to move back to 19's.

My current setup is as follows:

Front: 20x9 +38 (Michelin PSS 245/30/20)

Rear: 20x10.5 +45 (Michelin PSS 285/25/20)

I'm wondering if I can go to the below without any rubbing?

245/35/19 front wheels 19x8.5, 5x114 lug pattern, +35 offset, 73.1 hub bore

275/30/19 rear wheels 19x9.5, 5x114 lug pattern, +35 offset, 73.1 hub bore

Any help is much appreciated, enjoy the holiday!

blackisF08

iTrader: (2)

you should be fine as long as you are not lowered, if you are you might need some figs engineering parts to help out with camber

MileHIFcar

I have the exact same set up tires and wheels except my offset is +45 on the rear and I'm lowered on Swift springs with no rubbing. I don't know if the extra 10mm in the rear (+35) would cause rub but doesn't seem too far off my set up???

jspecvtec

iTrader: (4)

+35 is a bit too much for rears, you'll probably rub unless u get some camber and shaved fenders

ISFPOWER

iTrader: (20)

it would work perfectly. had that set up before.

a rear 10.5 with 275/30 with 35 offset would work as well, especially since it slightly stretches the tires for clearance .

but my rear fenders were rolled. this should be done on every car that wants to fit a nice looking set up.

Maskaveli

Thanks everyone, sounds like I'm in good shape. Everyone enjoy their Holiday!