Tein Info For You Guys !
#21
Pole Position
#24
put teins on this weekend
the ride is very good not as stiff as the stock suspension.....took a while to put on but once i got them on the gap was gone......very straight forward everything was pretty much the same as when i lowered my 350 just the engine bay clips r a little different on the in side clips.....u have 2 take both plastic pieces off 2 get 2 the mounts in the engine bay but overall i like them alot.....make sure 2 line up everything b4 u put spring compressor off this saves alot of time i marked everything with a marker b4 i unistalled so i would get as close as possible 2 what is was originally....
#25
also having 2 jacks 4 the rear to line everything back up helps out alot just jack it into positon and put the bolts thru.......in the front i did nt have 2 disconnect the arms at the top if u slide it out underneath the brake lines it come right out....
#28
Driver School Candidate
Join Date: Nov 2008
Location: NC
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know how the quality of Tein springs compare to Eibach? I have heard before that Tein springs tend to sag really quickly. Does anyone have any input in this?
For those of you running the Teins, does the front or rear rub anywhere?
Thanks in advance!
For those of you running the Teins, does the front or rear rub anywhere?
Thanks in advance!
#30
Driver
Thread Starter
Join Date: Jan 2009
Location: NJ
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Ride is Great still!
Have put over a 1000 miles and no complaints at all. No sign of sag and the drop is perfect. I submitted pics under a different thread check them out!
Have put over a 1000 miles and no complaints at all. No sign of sag and the drop is perfect. I submitted pics under a different thread check them out!