2011 Mark Levinson stereo upgrade / build
#16
Well the amp is on a late train (UPS), so I haven't received it yet and looks like it's lost in Texas somewhere (poor amp). I did get my Polk Audio components in yesteryday and got them installed. This ended up being a major pain in the butt as the cutouts in the door are too big for the brackets with the speaker. I ended up taking the ML spearkers out of their bracket and had to file a few parts on them for a flush fitment. I then used some E600 adhesive to glue the speakers into the bracket (screws didn't line up). I took some screws and drilled them down thru the speakers holes. UGH! I was nervous about doing this but it actually turned out very nice! Also, I had planned on putting the Polk tweeters where the small 3" mids are, but turns out they fit perfectly in the stock tweeter location and in my opinion are a better spot for them. I also had to glue them in as well, but everything looks stock. I didn't take any pictures, but if for some reason if I have to take the door back apart I will. Now if that amp would get here, I could listen to them!
#17
Here's that amp I bought that will run EVERYTHING. It's powering the 6.5 midwoofers on 2 channels, tweeters on 2 channels, and the sub will get 400 watts @ 2 ohms on the last channel. The components are 2.7 ohms so I figure about 90 watts to all of them.
http://www.sonicelectronix.com/item_...PAD5000.5.html
And here are the speakers:
http://www.sonicelectronix.com/item_...io-MM6501.html
http://www.sonicelectronix.com/item_...PAD5000.5.html
And here are the speakers:
http://www.sonicelectronix.com/item_...io-MM6501.html
#18
Amp came in today and it's been frustrating. I was running the new speakers off the stock amp and it sounded very good. I'm working on it tonight and have hooked up the amp and the LC6i. There is a LOT of static on the bass notes and a loud buzz. I have the gain turned all the way down on the amp. I've double checked polarity on all speakers. I'm just completely stumped. Anyone have a clue as to what I might check next? I'm going back to reading the manuals at this point, specifically the LC6i.
#22
#23
The higher I set the gains on the LC6i, the more hiss I get. Conversly, if I set the gains lower on the LC6i the hiss goes down, but I have to compensate with the gains on the amp (by turning them up) and the hiss comes back. Is this hiss sound something that's just going to be apparent or is there a way to get rid of it?
#25
Yeah, same problem. Only notice the hiss on zero volume. If I turn it up, it's gone. Just wondering if there's a way to get rid of the hiss at zero volume, or is that just something that's going to be there? Other than that, everything seems to be pretty good. As far as eq, the head unit still works, but it's limited to the obvious 3 bands.
#26
Just noticed something interesting on my lunch break. When connecting my factory sub wires (brown and lime green) to the LC6i, it's outputting a high frequency. I even took the sum jumper of to test it. I'm curious to know if the LC6i is able to take 1 set of speaker inputs into just a left or right now and work like that? So, essentially, I'm not getting the low sub frequencies. Noticed this when setting the low pass filter to around 60hz and hardly anything was coming out of the sub even at maximum gain settings. Maybe I should just hook the sub into a cheap scosche LOC and run that to the amp and just do the compenants off the LC6i. Oh the joy!
#29
Just noticed something interesting on my lunch break. When connecting my factory sub wires (brown and lime green) to the LC6i, it's outputting a high frequency. I even took the sum jumper of to test it. I'm curious to know if the LC6i is able to take 1 set of speaker inputs into just a left or right now and work like that? So, essentially, I'm not getting the low sub frequencies. Noticed this when setting the low pass filter to around 60hz and hardly anything was coming out of the sub even at maximum gain settings. Maybe I should just hook the sub into a cheap scosche LOC and run that to the amp and just do the compenants off the LC6i. Oh the joy!
The nine noise may be there. It doesn't bother me cause my exhaust drowns it out
#30
Starting to agree with you Chris. I ran the subwoofer through a scosche LOC and it works perfectly. Don't understand what the deal is with the LC6i. I'll probably just run this setup for awhile and then just buy a MS8 down the road. For the people that don't tap the stock sub frequencies....you're really missing out. Ask me how I know?