Fsport fog lights
#16
Racer
iTrader: (3)
http://www.**********.com/product.ph...-FS-C&t=spyder
#17
Our fog lights are designed with the same tabs as the OEM garnish bezel covers. Since the LED fog lights have the LED with projector inside, it does become a bit more weighted than the factory bezel with nothing on it.
We advise our customers to push in the fog lights from the front of the bumper and use their other hand to simultaneously pull the fog light from behind the bumper. This locks the tabs in the fog lamp opening to secure the assembly. Our customers who follow this troubleshoot haven't come back with similar issues.
We advise our customers to push in the fog lights from the front of the bumper and use their other hand to simultaneously pull the fog light from behind the bumper. This locks the tabs in the fog lamp opening to secure the assembly. Our customers who follow this troubleshoot haven't come back with similar issues.
#18
Originally Posted by specONE
Did the fogs housing supplied with your kit not look anything like these?
http://www.**********.com/product.ph...-FS-C&t=spyder
http://www.**********.com/product.ph...-FS-C&t=spyder
#19
Did the fogs housing supplied with your kit not look anything like these?
http://www.**********.com/product.ph...-FS-C&t=spyder
http://www.**********.com/product.ph...-FS-C&t=spyder
#20
Originally Posted by AMNss
This looks very similar to the OEM ones. The cover which they took picture off earlier in the thread seems different (little glossy black).
#22
Racer
iTrader: (3)
The Spyder ones I posted pictures of are dead on copies of the OEM JDM ones. The housing and mounting points. The only difference is the wire harness connector. I dont understand what is making the ones you guys have not fitting if they look like the Spyder's I posted earlier.
I have OEM ones.
Here are some pictures of actual OEM ones
and mounted without Shroud on yet
shroud on
I have OEM ones.
Here are some pictures of actual OEM ones
and mounted without Shroud on yet
shroud on
Last edited by specONE; 07-06-16 at 10:34 AM.
#23
The Spyder ones I posted pictures of are dead on copies of the OEM JDM ones. The housing and mounting points. The only difference is the wire harness connector. I dont understand what is making the ones you guys have not fitting if they look like the Spyder's I posted earlier.
I have OEM ones.
Here are some pictures of actual OEM ones
and mounted without Shroud on yet
shroud on
I have OEM ones.
Here are some pictures of actual OEM ones
and mounted without Shroud on yet
shroud on
#24
Former Sponsor
iTrader: (5)
We have a forum discount for CL members if you're interested:
https://www.clublexus.com/forums/clu...og-lights.html
https://www.clublexus.com/forums/clu...og-lights.html
#25
Driver School Candidate
Join Date: Jun 2016
Location: Louisiana
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I'll never buy IJDMTOY products again. Less than 3 months and one light went out already. Had 2 days left on my warranty and I was told on the phone that I had to troubleshoot the light and take pictures for them and fill a form. Then remove the foglight and send it out to them and have it in their possession in a day and a half. If not, the warranty won't cover it. I then tried to contact them to order a new driver side fog light to replace the broken one. The first time, someone told me that I had to fill out a special order form for it. I did what they said, and never got a response. Then I call again the following week and someone said that they would call me back in the same day, no later than a day after with prices and all. Still no call. I then call for the third time, and someone (sounds like the same guy everytime) puts me on hold and goes and gets the price for me. He then tells me it takes 2 weeks since it's being ordered from overseas. I asked if they warranty the item since I'm buying it brand new. He tells me no. It's considered a spare part so they won't warranty it. They said all spare part sales are final. I'm paying $100 for one light, which is brand new. And it's considered a special order. But no warranty for it. Doesn't sound good at all that they can't back up their product. The fact that I already had one go out makes me skeptical about paying $100 (full price) to pay for another light that they won't even back up with a warranty. NEVER AGAIN. Sorry for the rant. Just thought I'd throw it out there.
#26
Originally Posted by dwz5o4
I'll never buy IJDMTOY products again. Less than 3 months and one light went out already. Had 2 days left on my warranty and I was told on the phone that I had to troubleshoot the light and take pictures for them and fill a form. Then remove the foglight and send it out to them and have it in their possession in a day and a half. If not, the warranty won't cover it. I then tried to contact them to order a new driver side fog light to replace the broken one. The first time, someone told me that I had to fill out a special order form for it. I did what they said, and never got a response. Then I call again the following week and someone said that they would call me back in the same day, no later than a day after with prices and all. Still no call. I then call for the third time, and someone (sounds like the same guy everytime) puts me on hold and goes and gets the price for me. He then tells me it takes 2 weeks since it's being ordered from overseas. I asked if they warranty the item since I'm buying it brand new. He tells me no. It's considered a spare part so they won't warranty it. They said all spare part sales are final. I'm paying $100 for one light, which is brand new. And it's considered a special order. But no warranty for it. Doesn't sound good at all that they can't back up their product. The fact that I already had one go out makes me skeptical about paying $100 (full price) to pay for another light that they won't even back up with a warranty. NEVER AGAIN. Sorry for the rant. Just thought I'd throw it out there.
The product also stands out very a lot in a bad way because it's awkwardly shifted out so much away from the bumper. Stick with grimmspeed license plate relocater, it's worth the extra $40 trust me.
#27
Driver School Candidate
I currently have the DTmoto fog lights and am unhappy with the light output. Would I be able to use the ijdmtoy kit with the harness the DTmoto kit came with? I'm assuming I'll I need to do is splice the plug onto ijdmtoy kit and bolt the new ones up since everything else is pre wired..
#28
I currently have the DTmoto fog lights and am unhappy with the light output. Would I be able to use the ijdmtoy kit with the harness the DTmoto kit came with? I'm assuming I'll I need to do is splice the plug onto ijdmtoy kit and bolt the new ones up since everything else is pre wired..
Im am looking for foglights myself...debating between the two fog lights.
also...anyone else here able to find pre existing cables for the fog lights as mentioned in this thread? I was unable to find any.
https://www.clublexus.com/forums/is-...ers-diy-3.html
Last edited by Stevent; 07-07-16 at 08:01 PM.