Question on WAXING your new car - Page 2 - Club Lexus Forums

Log In 

Question on WAXING your new car

Reply
 
 
 
Thread Tools Search this Thread
Old 07-05-14, 11:50 PM   #16
tkr128
Driver School Candidate
 
Join Date: Jul 2004
Location: CA
Posts: 29
Default

Theoretically a brand new car should be perfectly clean. However, this is not always the case. A lot happens between the point the car is manufactured and you take delivery. Usually, after it's made, the cars may sit on a lot for a little bit until being transported to the port where they are shipped off to other countries. There, they may sit until the ship comes in. After that, it's driven onto the ship and starts it's journey across the sea which may take weeks until it arrives at the destination port. Once it arrives, it might sit at the port for another period of time before being transported by trucks to your dealer. If you're lucky, you'll pickup the car right after it's transferred off the truck. But for many other people, the car sits on the dealer's lot until you come around to buy it. During all this time, contaminants are being deposited onto the paint surface.

Some say it's overkill to clay a new car, but I personally wouldn't want to be waxing over any contaminants. I picked up my NGP IS350 a few weeks ago and plan to clay and do a decontamination process before I put on CQuartz/OptiCoat (still deciding on which one). My car definitely needs to be clayed.
tkr128 is offline   Reply With Quote
Old 07-06-14, 07:09 AM   #17
4TehNguyen
Lexus Fanatic
iTrader: (1)
 
Join Date: Jan 2006
Location: Houston, Texas
Posts: 20,521
Default

put your hand in a plastic bag and feel the paint on a brand new car. Its not clean. Claybar sterilizes the surface of contaminants.
4TehNguyen is online now   Reply With Quote
Old 07-06-14, 07:16 AM   #18
skip000
Driver School Candidate
Thread Starter
 
Join Date: Apr 2013
Location: CT
Posts: 36
Default let the waxing begin

I just found out my long awaited car is here,,I will pick it up on wednesday...Atomic Silver IS350. I really do enjoy waxing a beautiful new car ! Especially when IT'S MINE
skip000 is offline   Reply With Quote
Old 07-06-14, 08:12 AM   #19
AMNss
Pole Position
 
Join Date: Aug 2013
Location: Middle east
Posts: 371
Default

Quote:
Originally Posted by gm4life View Post
I wouldn't typical clay bar an entire new car. However, I always do hit them with at least a half dozen coats of good paste wax. For my money Megs Gold Class Carnuba Paste wax is the way to go. I clay bar sometimes after the winter etc. but typically wouldn't on a brand new car. When my IS comes in the coming months - I will be doing to it exactly what I mentioned above.
Which is better the megs WAX or the sonax product mentioned earlier ?

I can buy megs WAX from local dealers , but sonax is not available and I heard that sonax product can be used to give the clear bra good shine .
AMNss is offline   Reply With Quote
Old 07-06-14, 08:28 AM   #20
Lost808
Pole Position
 
Lost808's Avatar
 
Join Date: Jan 2014
Location: California
Posts: 207
Default

If I had the choice of only one product between wax or sealant, I will choose sealant every time. SONAX sealant is great and provides 6 months protection and awesome beading. However, SONAX is not slippery feeling after like wax is. It is smooth, but not slippery if that makes sense. The wax over the sealant will give it a really great deep shine and extra protection.
Lost808 is offline   Reply With Quote
Old 07-06-14, 08:30 AM   #21
gm4life
Driver School Candidate
 
gm4life's Avatar
 
Join Date: Jun 2014
Location: Iowa
Posts: 15
Default

Quote:
Originally Posted by AMNss View Post
Which is better the megs WAX or the sonax product mentioned earlier ?

I can buy megs WAX from local dealers , but sonax is not available and I heard that sonax product can be used to give the clear bra good shine .
This is the stuff I use...

http://www.amazon.com/gp/aw/d/B0009IQXCM?cache=3ab31541cc1bba2c2149f316feba4a04&pi=SY200_QL40&qid=1404660520&sr=8-1#ref=mp_s_a_1_1

I am pretty **** about cars and for the money think this is the "stuff."
gm4life is offline   Reply With Quote
Old 07-06-14, 09:58 AM   #22
AMNss
Pole Position
 
Join Date: Aug 2013
Location: Middle east
Posts: 371
Default

Quote:
Originally Posted by Lost808 View Post
If I had the choice of only one product between wax or sealant, I will choose sealant every time. SONAX sealant is great and provides 6 months protection and awesome beading. However, SONAX is not slippery feeling after like wax is. It is smooth, but not slippery if that makes sense. The wax over the sealant will give it a really great deep shine and extra protection.
I heard that the "wax effect " doesn't last long only two to three washes .
" wax effect "<== good title for you know movie ...
AMNss is offline   Reply With Quote
Old 07-06-14, 04:51 PM   #23
Lost808
Pole Position
 
Lost808's Avatar
 
Join Date: Jan 2014
Location: California
Posts: 207
Default

Wax effect of what, sealant or wax? I use detail spray and fine microfiber towel to remove light (and I mean light) dust in between washes. That helps avoid washing all the time. The slippery feel of the wax lasts for months if I take care of it. The water beading lasts even longer.
Lost808 is offline   Reply With Quote
Old 07-06-14, 05:37 PM   #24
afdavey
Driver
 
Join Date: Jun 2008
Location: NJ
Posts: 135
Default

WAX ON !

Enjoy your new ride ...

Sent from my iPhone 5s using IB AutoGroup
afdavey is offline   Reply With Quote
Old 07-06-14, 07:29 PM   #25
shortstop
Driver School Candidate
 
shortstop's Avatar
 
Join Date: Jun 2014
Location: New Jersey
Posts: 7
Default Clay bar !

Clay bar is always the first step for any clean car fanantic. Then paint correction for brand new or old cars, followed by polish, and then wax or sealers. You never want to wax over contaminants.
shortstop is offline   Reply With Quote
Old 07-07-14, 09:08 AM   #26
JB5674
Pole Position
 
Join Date: Nov 2013
Location: MD
Posts: 357
Default

There is only one way to do it and that's the right way. I would head to a site like autogeek.net or detailEra domain. Buy yourself a Porter Cable 7424 kit. This would be a good starting point.

Wash
Clay
Comping
Glaze
Seal
Wax
Spray Wax ( for leftover residues )

This keeps the wax effect and keeps the paint protected. OptI pro is a great product, as well there are many other " sealants " that act as another layer of protection. Personally, I wax my car one a week/two weeks. I'm ****, detailing is a hobby and my is350 f sport is black.

Autogeek is the most informative site on the net between their people and forums. Give the a buzz
JB5674 is offline   Reply With Quote
Old 07-07-14, 02:07 PM   #27
Hupperware
Driver School Candidate
 
Hupperware's Avatar
 
Join Date: Mar 2014
Location: AZ
Posts: 8
Default

Rail dust is a thing... it sucks for car paint. Clay bar.

Use Adam's Polishes. You cannot beat them.
Hupperware is offline   Reply With Quote
Old 07-08-14, 04:12 AM   #28
skip000
Driver School Candidate
Thread Starter
 
Join Date: Apr 2013
Location: CT
Posts: 36
Default dealership detailing car

My sales rep called me to pick up my new car wed morning...said it is in the shop being detailed, as we speak...I wonder what does that exactly mean??? Are they simply putting a coat of wax on it, or something more involved???? Also mentioned to him about all the BAD things I'm reading on this forum, about batteries dying...cars being dead in the morning...said he will check on this for me...not exspecting anything to come out of that thou.
skip000 is offline   Reply With Quote
Old 07-08-14, 06:59 AM   #29
dstopsie
Lead Lap
 
dstopsie's Avatar
 
Join Date: Aug 2006
Location: Los Angeles, CA
Posts: 520
Default

Quote:
Originally Posted by skip000 View Post
My sales rep called me to pick up my new car wed morning...said it is in the shop being detailed, as we speak...I wonder what does that exactly mean??? Are they simply putting a coat of wax on it, or something more involved???? Also mentioned to him about all the BAD things I'm reading on this forum, about batteries dying...cars being dead in the morning...said he will check on this for me...not exspecting anything to come out of that thou.
I had an IS250 Fsport that I got last year and just flipped it for the 350.

I never had 1 issue with the car that others are reporting other than the clunking i heard first that was from the parking brake issue. that never repeated itself. Yes the nav was a bit slow, but so what, I am not in a rush to get anywhere. I really found no issues with the car and yes I am very picky and OCD and that is why I got rid of the black 250 in favor of the Ultra White 350.

So while others may have issues, don't let that taint your view of the car. It is a great car, fun to drive and there may be issues. but the dealer will fix those.

The 350 is my 6th IS, and I have never had one mechanical issue with any of them. They all were fine and fun to drive and that is the main reason i keep getting new ones.

Enjoy your car, and just have fun. Life is too short to do otherwise.

Congrats on your carů..!!!
dstopsie is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
2016 NX300h Vortex Blue metallic phatm3 NX Models (2015-present) 15 10-28-15 11:27 PM
Wax Recommendations? Jolexus IS - 3rd Gen (2014-present) 14 07-29-15 12:07 PM
Best wax? jbone29 Automotive Care & Detailing 20 03-30-15 01:15 PM
Wax on...Wax off... titoman110 IS - 3rd Gen (2014-present) 15 01-21-15 09:28 AM
Dishwasher soap wash before waxing? Aeromotive Automotive Care & Detailing 3 09-20-14 09:23 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 07:12 AM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved