Building an IS350 6MT
#92
Lexus Test Driver
hey Jeff, are you gonna do a full write up of everything someone would need to do the swap? doesnt need to be step by step (but would be great) but at least parts list and who we would need to contact to do ECU reprogram
The following users liked this post:
soulific (10-22-20)
#94
No updates yet, no. Was in Hawaii for a bit and then Christmas and now New Years. Slowed progress a bit, lol. I had to order one last hose that I needed and then it should be all mechanically installed. Still need to put the interior back together as well I suppose. Once all that is done I'll get the ECU ready for programming.
Going to order the brakes today though I think. Just deciding which ones to get....
Jeff
Going to order the brakes today though I think. Just deciding which ones to get....
Jeff
#95
OG Member
iTrader: (1)
No updates yet, no. Was in Hawaii for a bit and then Christmas and now New Years. Slowed progress a bit, lol. I had to order one last hose that I needed and then it should be all mechanically installed. Still need to put the interior back together as well I suppose. Once all that is done I'll get the ECU ready for programming.
Going to order the brakes today though I think. Just deciding which ones to get....
Jeff
Going to order the brakes today though I think. Just deciding which ones to get....
Jeff
We've talked about the potential of the 4GS350 F-Sport brake swap on the forums before but I'm not sure if anyone has actually made this happen. Perhaps you can do the honors of being the first and also add another unique OEM+ upgrade to your mod list.
#97
Since your build demonstrates what OEM swaps are possible on the 2IS platform, perhaps a brake upgrade to the 4th Gen GS350 F-Sport brakes would be a good candidate?
We've talked about the potential of the 4GS350 F-Sport brake swap on the forums before but I'm not sure if anyone has actually made this happen. Perhaps you can do the honors of being the first and also add another unique OEM+ upgrade to your mod list.
We've talked about the potential of the 4GS350 F-Sport brake swap on the forums before but I'm not sure if anyone has actually made this happen. Perhaps you can do the honors of being the first and also add another unique OEM+ upgrade to your mod list.
IS F brakes likely won't happen.
Jeff
#98
Moderator
iTrader: (10)
Since your build demonstrates what OEM swaps are possible on the 2IS platform, perhaps a brake upgrade to the 4th Gen GS350 F-Sport brakes would be a good candidate?
We've talked about the potential of the 4GS350 F-Sport brake swap on the forums before but I'm not sure if anyone has actually made this happen. Perhaps you can do the honors of being the first and also add another unique OEM+ upgrade to your mod list.
We've talked about the potential of the 4GS350 F-Sport brake swap on the forums before but I'm not sure if anyone has actually made this happen. Perhaps you can do the honors of being the first and also add another unique OEM+ upgrade to your mod list.
Still had yet to pull the trigger. Just working on the all-out engine performance at the moment. But here's a deal if you're looking for a slightly used set : http://www.ebay.com/itm/321803572124?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
The only thing I've been unable to narrow down is the closeness in design/dimensions is the knuckles on both cars.
#99
The knuckles are very different, as such the backing plates won't work, however IS F ones will likely work in place, they use the same calipers and rotors as the IS350 on non-F-Sport models, so the mounting should be the same as far as that goes.
If they didn't require 18-inch wheels and an alloy spare I'd already have them. :\
Jeff
If they didn't require 18-inch wheels and an alloy spare I'd already have them. :\
Jeff
#100
So I was in Hawaii for a bit over a week on vacation and then Christmas happened, but work is underway again. Engine is basically assembled now, save for a hose. Should hopefully be able to send the ECU for programming next week I hope!
New brakes and a new windshield also going to happen in the next few days as well.
Jeff
New brakes and a new windshield also going to happen in the next few days as well.
Jeff
Last edited by Jeff Lange; 12-13-19 at 10:27 AM.
#105
Tech Info Resource
iTrader: (2)