Joe-z intake pipe and some bushings
#1
Driver
Thread Starter
Join Date: May 2014
Location: a tropical place
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Joe-z intake pipe and some bushings
1. Ive searched everywhere but i can't find where to buy a Joe-z direct air flow intake pipe!! Can anyone point me in the direction where i can find one?
2. Also i want to replace the bushings on both my stabiliser bars since they are making a creaking sound and that fixed it on my other 250 but i want to get some harder polyurethane bushings to stiffen up a bit but i can't seem to find them. Anyone done this? Also some harder bushings for the lower control arms too to tighten steering response and they are prob worn anyways (the RR racing option is too expensive and prob an overkill for a 250).
edit:
anyone try these ?
http://www.ebay.com/itm/Hardrace-Lexus-IS250-350-GS350-Front-Lower-Control-Arm-Bush-Harden-Rubber-HR7105-/141278956329?hash=item20e4e1cb29&vxp=mtr
2. Also i want to replace the bushings on both my stabiliser bars since they are making a creaking sound and that fixed it on my other 250 but i want to get some harder polyurethane bushings to stiffen up a bit but i can't seem to find them. Anyone done this? Also some harder bushings for the lower control arms too to tighten steering response and they are prob worn anyways (the RR racing option is too expensive and prob an overkill for a 250).
edit:
anyone try these ?
http://www.ebay.com/itm/Hardrace-Lexus-IS250-350-GS350-Front-Lower-Control-Arm-Bush-Harden-Rubber-HR7105-/141278956329?hash=item20e4e1cb29&vxp=mtr
Last edited by SebaPR; 09-16-15 at 09:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
bentleymp2
Suspension and Brakes
3
01-08-16 09:28 AM