Wanting To Ditch the Woodgrain Interior
#16
Driver
iTrader: (1)
Join Date: May 2015
Location: California
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I did, you can prolly see some imperfection around it but from outside looking in it's not really noticeable. Beats having woodgrain
I have link to ebay but not a diy link, I just use a flat head and pop both silver trim on each side and slowly pop the center console out. Once center console is out there will be 2 wire plug that you have to disconnect, it's pretty straight forward and don't hesitate to use some force when yanking it off lol
Here's ebay link
5D Top Grade Shinny Gloss Glossy Black 24" x 60" Carbon Fiber Vinyl Wrap Sticker | eBay
Fast shipper and usa seller, took only couple days for it to arrive at parcel pick up for me.
I have link to ebay but not a diy link, I just use a flat head and pop both silver trim on each side and slowly pop the center console out. Once center console is out there will be 2 wire plug that you have to disconnect, it's pretty straight forward and don't hesitate to use some force when yanking it off lol
Here's ebay link
5D Top Grade Shinny Gloss Glossy Black 24" x 60" Carbon Fiber Vinyl Wrap Sticker | eBay
Fast shipper and usa seller, took only couple days for it to arrive at parcel pick up for me.
#19
I bought some cheap flat CF vinyl from Autozone and did everything in a few hours. Make sure the surface area is clean and have a heat gun/hair dryer handy. It helps the vinyl mold to the trim pieces. I don't have pictures of it right now but I personally think it looks very good. Post pics if you end up wrapping your interior! Believe me, it'll be worth the work and you'll be absolutely satisfied once you do it!
With that being said, I miss my car She's in storage until August 2016.
With that being said, I miss my car She's in storage until August 2016.
#20
I have the older 3M 1080 carbon fiber and wanted the gloss look. I bought some 4d/5d stuff off Aliexpress and have tested a bit out on the shift ****, but I have my doubts about it working as well as the 3M stuff and really don't want to remove the 3M if the new stuff will be worse.
#22
Driver School Candidate
Have you had issues with it not sticking well?
I have the older 3M 1080 carbon fiber and wanted the gloss look. I bought some 4d/5d stuff off Aliexpress and have tested a bit out on the shift ****, but I have my doubts about it working as well as the 3M stuff and really don't want to remove the 3M if the new stuff will be worse.
I have the older 3M 1080 carbon fiber and wanted the gloss look. I bought some 4d/5d stuff off Aliexpress and have tested a bit out on the shift ****, but I have my doubts about it working as well as the 3M stuff and really don't want to remove the 3M if the new stuff will be worse.
Thread
Thread Starter
Forum
Replies
Last Post
Randre19
Chicago Lexus Club
3
10-02-14 10:30 PM