Exhaust tips
#1
Driver School Candidate
Thread Starter
Join Date: May 2014
Location: ga
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust tips
i just put some exhaust tips on my 250 until mine got here which will be soon just wanted to show someone what it would look like if you or on a budget let me know what you think of the cheap mod it only cost 20 for each tip and 15 to get muffler cut and the tip tacked on and also my rims i got coming let me know what you think will be give my car a good look
#3
Lexus Champion
iTrader: (13)
Yeah it looks nice. An alternative would be something like a M2 for like $280 brand new which give you better sound and look provided you can install yourself to save that labor fee.
i just put some exhaust tips on my 250 until mine got here which will be soon just wanted to show someone what it would look like if you or on a budget let me know what you think of the cheap mod it only cost 20 for each tip and 15 to get muffler cut and the tip tacked on and also my rims i got coming let me know what you think will be give my car a good look
Trending Topics
#8
oks good, thinking of doing this myself, especially since I had the M2... It drones something terrible with the automatic trans. Maybe with the 6sp you can push in the clutch and there is no drone, but the auto drove me nuts. I sold it, and have been looking for something else. Where did you find these for $20 each? The problem I found was finding tips short enough to fit in there without hanging out too far
#10
No, The OBX, M2, Manzo, anything on Ebay for $280-$300ish range are all the same... Just a different dealer. Have a friend that runs a local speed shop and has vendors all the time contacting him about selling their knockoff chinese junk in his shop
#11
Driver School Candidate
Thread Starter
Join Date: May 2014
Location: ga
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
exhaust tips I used
The tip is a flow master tip I ordered from autozone the part number is 15371 the link to page is http://www.autozone.com/autozone/accessories/Flowmaster-Rolled-edge-angle-stainless-steel-exhaust-tip-Weld-on/_/N-25c8?id=337395&itemIdentifier=337395_0_0_
#12
Driver School Candidate
Thread Starter
Join Date: May 2014
Location: ga
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
exhaust tips I used
These tips where only 5 inches in length which was the perfect length just make sure to cut factory tips all the way off and get them to tack the tips directly to the factory muffler
Thread
Thread Starter
Forum
Replies
Last Post