will a flyaudio unit work in my 08 is 250 with factory nav and non ml?
10-31-11, 09:06 PM
#1
Lead Lap
Thread Starter
will a flyaudio unit work in my 08 is 250 with factory nav and non ml?
hello i am new here and i really want to install the flyaudio unit, however i believe that i may have to rewire some connectors? am i correct or is it just not possible.
10-31-11, 10:42 PM
#6
Lead Lap
Thread Starter
well im hope so cause i already ordered it and have the car apart! i have read that someone else successfully did it but had to make a j54 connector. anyone with any knowledge please help.
10-31-11, 10:46 PM
#7
Have you checked this thread?
https://www.clublexus.com/forums/is-...-levinson.html
He posted a wiring diagram on the second page. Not sure if its any different with the non-ML system.
https://www.clublexus.com/forums/is-...-levinson.html
He posted a wiring diagram on the second page. Not sure if its any different with the non-ML system.
Trending Topics
10-31-11, 10:49 PM
#8
Lead Lap
Thread Starter
yes i have seen that thread and it confuses me. where would i get a non nav j54 male connector to make that plug. and where would the j53 wires go on the j54 one? im lost!!!!!
11-02-11, 02:24 AM
#10
Lead Lap
Thread Starter
ok, i called lexus and ordered the j54 male connector, part number 11911 cost is 12 dollars, so i ordered 2 so i can make one for me and 1 for someone else (if needed in the future) because i hopefully finally figured out what exactly to do. i will be following the wiring diagram from the person who so gratiously posted it. what confused me was the light blue and orange wires that need to go into the new j54 male adaptor. after carefull review i believe i just have to remove them from the j51 pin 17 ,18 and into 1,2 of the new j54. fly unit arrives this friday! i will do the install and keep those who are interested informed. and p.s if someone can tell me how to insert images into this post , i will be able to give better detailed instructions for all who are wanting to do this
11-02-11, 05:10 AM
#11
ok, i called lexus and ordered the j54 male connector, part number 11911 cost is 12 dollars, so i ordered 2 so i can make one for me and 1 for someone else (if needed in the future) because i hopefully finally figured out what exactly to do. i will be following the wiring diagram from the person who so gratiously posted it. what confused me was the light blue and orange wires that need to go into the new j54 male adaptor. after carefull review i believe i just have to remove them from the j51 pin 17 ,18 and into 1,2 of the new j54. fly unit arrives this friday! i will do the install and keep those who are interested informed. and p.s if someone can tell me how to insert images into this post , i will be able to give better detailed instructions for all who are wanting to do this
Also if you want to post images you'll need to host them on Photobucket.com or some other type of hosting site.
11-02-11, 07:45 AM
#12
Lead Lap
Thread Starter
i will post the install! and i know how to add a link to images on photobucket, but not images directly in the post.
Last edited by linus73; 11-02-11 at 05:09 PM.
11-02-11, 05:20 PM
#13
Lead Lap
Thread Starter
well today i called someone who has done quite a few of these procedures( flyaudio in a factory nav car)
he was very willing to assist me with all my questions. all of my worries are gone as i am 110% confident that i will get it done. he says it will be a 30 min install once the old unit is out. so with that bieng said i will be stalking ups friday for the package. i hope the nav voice on the fly unit is not funny sounding.
(edit from moderator: for sale items go in the classifieds) from linus73(ok ill remember that)
he was very willing to assist me with all my questions. all of my worries are gone as i am 110% confident that i will get it done. he says it will be a 30 min install once the old unit is out. so with that bieng said i will be stalking ups friday for the package. i hope the nav voice on the fly unit is not funny sounding.
(edit from moderator: for sale items go in the classifieds) from linus73(ok ill remember that)
Last edited by linus73; 11-02-11 at 07:26 PM. Reason: for sale items go in classifieds
11-02-11, 07:19 PM
#14
well today i called someone who has done quite a few of these procedures( flyaudio in a factory nav car)
he was very willing to assist me with all my questions. all of my worries are gone as i am 110% confident that i will get it done. he says it will be a 30 min install once the old unit is out. so with that bieng said i will be stalking ups friday for the package. i hope the nav voice on the fly unit is not funny sounding.
(edit from moderator: for sale items go in the classifieds)
he was very willing to assist me with all my questions. all of my worries are gone as i am 110% confident that i will get it done. he says it will be a 30 min install once the old unit is out. so with that bieng said i will be stalking ups friday for the package. i hope the nav voice on the fly unit is not funny sounding.
(edit from moderator: for sale items go in the classifieds)