SeanO

iTrader: (1)

I'm running this exact set up with a very slight bit of rubbing full lock left turn. other then that its beauty, no rolling, decently flush.. not sure what you mean by what would my variance be?!

demotrek

Awesome - thanks for the response.

I was talking about the famous "1%" difference in tire rotation. I believe it's the diameter and speed variance that you want under 1%, so I was curious how close to stock that set up is. Thanks again.

guesswh0

I ran 19x9.5 all around +30 and i went with 235/35/19. You will have a little bit of rubbing which will require some cutting away and bracket removal, but then I was slammed.

IMPREZA2K6

is it fit

18x8.5 225-40-18 +22
18x9.5 245-40-18 +27

i drop on tein s tech no roll no pull

Jmonsini57

Will 18x9.5 rub with 225/40 I know the backs will be fine but what about fronts I'm stock now and am going to buy the sage lowering blocks

Jmonsini57

Will 18x9.5 all the way around with 225/40s rub In the front I'm in stock height and only getting the sage 20mm lowering blocks?!?!

sm1ke

iTrader: (5)

You need to post offset. But since you're not lowering by much, probably won't rub unless you're running +30 or lower..

LC_Ryan

iTrader: (3)

I want to run CR Kai's Ultimates 19x10.5 +32 f and 19x10.5 +22 r with 255/30/19 all around. Will these specs work on a 2-3 inch drop? I am rolling my fenders also.

Jmonsini57

I am going to run +30 so it's going to rub?!?😔

sm1ke

iTrader: (5)

Probably not if you're only lowering 20mm. I've lowered mine on coils probably 2.5"? This is my car on 18x9.5" +30, with 245/40/18 tires. Camber in the rear corrected to -0.5 degrees, I believe the same for the front. So your wheels will sit out just like mine do, but you'll have more wheel gap.




I do rub up front though, to the point where I had to bend back the metal on the bumper tab. I haven't gone as far as relocating the bumper tab like others have done though. Keep in mind, I'm running 245/40, so even at my height if you run 225s you shouldn't rub anything but the fender liner.

Jmonsini57

thanks a lot bought my set up now just waiting for my lugs and lowering blocks to come in I ended up picking up a set of varrstoens 18x9.5 I can't wait to put them on!

sm1ke

iTrader: (5)

Lol, exact same wheels I have, then again it is a very popular replica of a timeless classic. At least mine are powdercoated a different colour

IS2006

Looking to purchase a set of wheels with the following specs for my IS AWD:

Wheels (front and rear):
Diameter = 19"
Width = 8.5"
Offset: 35 mm

Tires:
235/35/19

Will these work without any fender modifications? Also, will they sit flush?

Thanks in advance!

pmanliu

iTrader: (4)

17x9.5 +30 all around on 235/45/17. Car is lowered on Tein S-Techs. Does anyone know if this will rub? what about on 245s instead?

Thanks!

As for why 17s, because im trying to preserve ride quality as much as possible while lowered.

joshua28

pretty sure it will fit but want to be 100% sure: 18x8 with 45mm offset will fit 225/40/18 tires all around? i have awd and currently have stock wheels 17x8 45mm offset. will wheels with 40mm offset fit the 225/40/18? sorry, new to wheels. tia.